IKEA Skadis - 40mmx80mm container (Vase)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like CSD_Salzburg's Skadis designs but these containers just take too long to print.
- Ocena
- 4,9 / 5
- Polubienia
- 62
- Pobrania
- 492
- Wydruki
- 18
- Wyświetlenia
- 2300
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like CSD_Salzburg's Skadis designs but these containers just take too long to print. So I adapted a vase printing idea to be used with the IKEA Skadis containers and added a little twist.
I also added a little feature trick to thicken up the portions of the container where the hook attaches.
Printing this vase version of the 40x80 container took about 50 minutes where the normal version takes about 3 hours. You could probably speed it up even more!
Again, the Container Hook is CSD_Salzburg's design, unmodified. I'm just including it here for convenience.
Print instructions
Print using the Vase option. Also, modify your filament settings to allow layers to take as little as 5 seconds. The 20 second default setting made the print 4x as slow!