Epson LabelWorks cassette dividers for IKEA HELMER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dividers to keep Epson LabelWorks cassettes organized in an IKEA HELMER drawer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Simple divider system for keeping Epson LabelWorks label cassettes/cartridges organized in an IKEA HELMER drawer.
This system allows you to neatly store up to five rows of cassettes per drawer. To keep it flexible, only the rows are divided. Each one fits about 9 cassettes, maybe a couple more or less depending on what tape widths you have – so roughly 40-50 per drawer.
All Epson LC/LK/PX, K-Sun P/PX, Panduit PXE, KING JIM P/R, and Chinese clone cassettes should be compatible.
To fill an entire drawer, I recommend printing the following:
- 1x “front row” piece, which prevents the cassettes from getting caught under the lip of the drawer face
- 4x “standard row” pieces
- 1x “fat end” piece, which simply fills the remaining space in the back
If you don't need to fill the whole drawer, you can mix and match whatever pieces suit your needs. A “slim end” is also provided which has the same thickness as the “standard row” divider.
Print with a brim at 0.2mm layer height.
Each piece has little holes through the joints so you can secure them with a bit of unprinted filament. I suggest cutting off a ~10cm length of filament, forcing it in until you feel it bottom out (about 6mm), and then carefully shaving it flush with a sharp knife. It's a tight fit so it's a little difficult, but once it's in and flush it'll never come out again. If the holes are slightly misaligned, poke a drill bit in and spin it with your fingers. Don't be too aggressive or it won't be secure. You can also just glue them together if you want.
The dividers are meant to fit snugly in the drawer. I tested them with several of mine and they all worked well, but since it's hand-bent sheet metal the exact dimensions can vary – maybe print one piece and make sure it fits before you do the rest.
My main goal with this design was to pack in as many cassettes as possible. Hopefully that explains some of the choices I made, like why it's not Gridfinity-compatible and why the cassettes don't sit with their labels facing up.
The examples in the photos were printed in Bambu PLA Basic (Bambu Green).
Links:
- IKEA HELMER
- Epson LabelWorks
- Example of compatible Epson cassette on Amazon
- Example of compatible clone cassette on Amazon
Change history:
- v15 – 2025-08-01 – Initial release.