Erhöhung passend für Ikea Skoläst / Riser suitable for Ikea Skoläst
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2cm Erhöhung / 2cm Riser
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Beim Ikea Besuch die Skoläst Spülbeckenablage mitgenommen.
Doch schnell stellte sich ein "Problem" heraus.
Unser Spülbecken ist nicht tief genug oder unser Spültuch zu lang?
Jedenfalls hing das Tuch immer auf dem Boden des Spülbeckens und hat sämtliche Flüssigkeiten aufgesogen die man im Spülbecken so entsorgt.
Dafür eine 2cm Erhöhung für den "Lappen-Halter" entworfen.
Sie wird an der Schale angeschraubt und der grüne Arm wird in die Erhöhung eingeklipst. Der Arm kann weiterhin gedreht werden.
Jetzt kann der Lappen trocknen und saugt sich nicht immer voll.
Die Schraube sollte man mit einer Layerhöhe vom 0,1 mm drucken.
Bei gefallen, lasst mir doch gerne eine Like, Make oder Kommentar dar
English (Google Translation)
When I went to Ikea, I took the Skoläst sink shelf with me. But a "problem" quickly arose. Our sink is not deep enough or our dishcloth is too long? In any case, the cloth always hung on the bottom of the sink and soaked up all the liquids that were disposed of in the sink.
For this purpose, a 2cm elevation for the "cloth holder" was designed. It is screwed onto the bowl and the green arm is clipped into the elevation. The arm can still be rotated.
Now the cloth can dry and does not always soak up water.
The screw should be printed with a layer height of 0.1 mm.
If you like it, please leave me a Like, Make or Comment