Multiple Variants RackPi 2HE Rackmount for Blackmagic Design Micro Converter 3G/12G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RackPi Style Mount for multiple Blackmagic Design Micro Converters. Redesign to have the HDMI Ports out.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
RackPi Style Mount for Multiple Blackmagic Design Micro Converters (see STL names) on DAP 19'' 2HE MP-1.
If a Converter is missing that you need, write me a message and i'll ask some measurements to add it.
Tested on this printable Rackmount from wilimis on Thingiverse: https://www.thingiverse.com/thing:4071143
Works with original Screws, just need 2x M3x5mm machine screws to mount to the plate.
Text added in Slicer not model to allow for customization or single colour prints.
Works with original screws.
Printed on a Bambu Lab X1 Carbon using PETG and 0.28mm Layer height for speed and strength.
The converters might get too hot for PLA, not sure if even too hot for PETG. Print in ASA or ABS if needed.
Hope to see your Makes and Racks :)