Vespa in frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to mount the vespa from P-atix in a frame.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 217
- Wydruki
- 3
- Wyświetlenia
- 1297
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the Vespa by P-atix. I got the idea from LR3DUK who shared a make of the Vespa in a frame but unfortunately not the modified files. That's why I've put them here for you.
Thanks to both of them.
Only a few parts need to be modified, which I have uploaded. All other parts can be downloaded from the original model.
Here is a list of all modified parts required … :
- 01_framework_flat
- 02_handlebar_flat
- 06_tire_flat (you need 1 modified and 2 original)
- 07_wheel_flat (you need 1 modified and 2 original)
- vespa_logo
… and all original parts:
- 03_seat
- 04_mudguard
- 05_engine
- 06_tire (you need 1 modified and 2 original)
- 07_wheel (you need 1 modified and 2 original)
- 08_wheel_rod
- 09_backlight
- 10_front_pin_15 (2 times)
- 11_front_pin
- 12_rear_wheel_washer
I used the IKEA SANNAHED frame (25x25cm), here you need a white paper for background. But you can also use any other suitable frame.
Have fun printing, it was a great gift for someone.