1 / 4
Anker 737 120W GaNPrime EU Charger Travel Case — zdjęcie 1
1 / 4

Anker 737 120W GaNPrime EU Charger Travel Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A travel case for Anker 737 GaNPrime EU Charger with a cable wraparound.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The case holds the charger due to friction and it allows a long cable to be wrapped around it. It safeguards the  charger, as well as the plug and it allows a long cable to be wrapped around.

Print instructions:

  • Printable in PETG, FLEX, PLA;
  • As the case relies on friction, depending on your printer settings, your mileage will vary. You might need to scale it up or down.
  • Adaptive infill 15%
  • 0.2 structure preset on the Mini+ IS;
  • Snug supports for enforcers only.

Happy printing! If you print, please post a make.

Inspired by Sébastien's Steam Deck OLED - Minimalist Cable Organizer - EU Version.

 

Tagi