Cuboid Shadow Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
INFO
A cuboid lamp that throws a shadow/light pattern on the ground. It uses a lamp with a solar panel to charge during the day.
It is printed in one piece and doesn't need any supports. To use outside it is recommended to print in a UV-resistant material like ASA.
Printable feet are also included. They need to be glued to the underside and can be printed in TPU.
The shadow lamp is designed for a solar lamp with a diameter of 9.3cm. Different adapters are included for the most common lamps you can buy online.
Supported lamp diameters:
9.3cm (default)
7cm (7cm_adapter)
7.3cm (7.3cm_adapter)
The used lamp:
Other supported lamps:
PRINTING
Layer Height: 0.2 (or wathever you want, it doesn't matter)
Material: PLA or PETG (ASA or alternatives for outside)
Supports: Yes (the top needs to be supported from the inside)
Brim: Yes (inside and outside)
Print the .step file for better quality
Some adhesive may be required depending on you printer and your settings (especially for ASA)