Cuboid Shadow Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cuboid shadow lamp which uses a solar powered lamp to throw a pattern on the walls and ground.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
INFO
A cuboid lamp that throws a shadow/light pattern on the ground. It uses a lamp with a solar panel to charge during the day.
It is printed in one piece and doesn't need any supports. To use outside it is recommended to print in a UV-resistant material like ASA.
Printable feet are also included. They need to be glued to the underside and can be printed in TPU.
The shadow lamp is designed for a solar lamp with a diameter of 9.3cm. Different adapters are included for the most common lamps you can buy online.
Supported lamp diameters:
9.3cm (default)
7cm (7cm_adapter)
7.3cm (7.3cm_adapter)
The used lamp:
Other supported lamps:
PRINTING
Layer Height: 0.2 (or wathever you want, it doesn't matter)
Material: PLA or PETG (ASA or alternatives for outside)
Supports: Yes (the top needs to be supported from the inside)
Brim: Yes (inside and outside)
Print the .step file for better quality
Some adhesive may be required depending on you printer and your settings (especially for ASA)