1 / 3
Flair Fidget Aura Sand Top Cover — zdjęcie 1
1 / 3

Flair Fidget Aura Sand Top Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement top cover for the aura sand fidget slider

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I found the top cover to be too slippery for my hands so I modeled and 3d printed a replacement cover. 

 

I printed at 100% infill without any supports.

 

Items needed:

3d Printed Cover

soldering iron

m2x2.3.2 heat set inserts

m2x6 torx screws

 

Once the top is printed, melt the heat set inserts into the holes in the print, you should make them sit flush with the bottom. Then you can use the torx screw to screw the cover back onto the body!

Tagi