1 / 3
Flair Fidget Aura Sand Top Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement top cover for the aura sand fidget slider
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I found the top cover to be too slippery for my hands so I modeled and 3d printed a replacement cover.
I printed at 100% infill without any supports.
Items needed:
3d Printed Cover
soldering iron
m2x2.3.2 heat set inserts
m2x6 torx screws
Once the top is printed, melt the heat set inserts into the holes in the print, you should make them sit flush with the bottom. Then you can use the torx screw to screw the cover back onto the body!