1 / 2
Ibanez Guitar Amp Knob for Amp with 6mm "D" Shaft — zdjęcie 1
1 / 2

Ibanez Guitar Amp Knob for Amp with 6mm "D" Shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All the knobs were breaking on my Ibanez acoustic amp so I designed this simple replacement.

Ocena
5 / 5
Polubienia
22
Pobrania
152
Wydruki
2
Wyświetlenia
478
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

Ibanez Guitar Amp Knob

All the knobs were breaking on my Ibanez acoustic amp so I designed this simple replacement. Although it was designed for an Ibanez amp, it would fit any amp with a 6mm shaft that is 4.5mm to the flat of the “D”.

Unlike some other amp knobs on here, I like designing to use no support. This model is orientated to print with no support. Additionally, you don't need a multi-color printer to print the marker in a different color. Simply print separately and slot it in. It should be a good friction fit, but you can add a drop of super glue if necessary.

 

Printing:

I used .2mm layer height and increased the wall count to 5.

NO supports

Print the knob and marker separately for a multi color look.

Tagi