Pusa Mini NF Crazy Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan shroud for the mosquito hotend conversion which fits the NF Crazy
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The NF Crazy and the mosquito are quite similar. Therefore it is possible to use the Mosquito conversion and shroud also for the NF Crazy:
https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud
https://www.prusaprinters.org/prints/37387-mosquito-mount-for-prusa-mini
Only one thing is different here. The NF Block has a different shape and therefore collides with the normal mosquito horns.
With the new duct it this can be changed. I reused the mosquito duct and shifted the horns by 3 and 5mm. Now it fits again;)
Print Instructions:
Same as with all other ducts…
Print in ABS, ASA, PA, PC @ 0.2mm 15% Infill and 0.15mm Layer height. PETG might also work. PLA has definitely too less temperature resistance.