Pusa Mini NF Crazy Fan Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fan shroud for the mosquito hotend conversion which fits the NF Crazy
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 921
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The NF Crazy and the mosquito are quite similar. Therefore it is possible to use the Mosquito conversion and shroud also for the NF Crazy:
https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud
https://www.prusaprinters.org/prints/37387-mosquito-mount-for-prusa-mini
Only one thing is different here. The NF Block has a different shape and therefore collides with the normal mosquito horns.
With the new duct it this can be changed. I reused the mosquito duct and shifted the horns by 3 and 5mm. Now it fits again;)
Print Instructions:
Same as with all other ducts…
Print in ABS, ASA, PA, PC @ 0.2mm 15% Infill and 0.15mm Layer height. PETG might also work. PLA has definitely too less temperature resistance.