1 / 1
MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts (STL's)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts (STL's)
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 1387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (56)Powiązane
Installation and Build
Assembly parts per the instructions here: https://help.prusa3d.com/category/original-prusa-mk4-kit-assembly_1967
Notes for build:
- X-Axis belt will need adjusting, as the stock MK3S+ (Non-MK4) belts and extruder body are a tad short compared to the length needed (But you can make it work).
- Without any other updates, I ran the full calibration cycle and the whole printer passed without a fail.
- You will need a pin for the Idle body (Step 35 in the manual, guiding the X-axis). Otherwise you should be able to locate most needed hardware via a small parts box from Amazon or a trusted source.