1 / 1
MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts (STL's) — image 1

MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts (STL's)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts (STL's)

Rating
5 / 5
Likes
31
Downloads
162
Makes
2
Views
1,387
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

Installation and Build

Assembly parts per the instructions here: https://help.prusa3d.com/category/original-prusa-mk4-kit-assembly_1967

Notes for build:

  • X-Axis belt will need adjusting, as the stock MK3S+ (Non-MK4) belts and extruder body are a tad short compared to the length needed (But you can make it work).
  • Without any other updates, I ran the full calibration cycle and the whole printer passed without a fail.
  • You will need a pin for the Idle body (Step 35 in the manual, guiding the X-axis). Otherwise you should be able to locate most needed hardware via a small parts box from Amazon or a trusted source.