TuKon 36 magnet tenting solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular tenting mod for TuKon 36 keyboard case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on tukon's case I created a simple, yet flexible tenting solution tailored for transportability.
The provided legs have a lenght of 35 mm which leads to about 20° of tenting. The magnets are basically press-fit though I recommend adding a drop of glue. Make sure to get the orientation of all magnets matched to have maximum flexibility when connecting the legs.
For printing, you can use the recommended settings from the original model.
Note: I know that there is some spacing between the top and bottom half in my pictures. I had some issues with my printer's calibration and currently re-print the case. Will add new pictures when everything works correct.