1 / 6
Silicgel box (about 45g of silica gel)-v1.0 — zdjęcie 1
1 / 6

Silicgel box (about 45g of silica gel)-v1.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A box that can hold about 45g of silica gel

Ocena
5 / 5
Polubienia
9
Pobrania
73
Wydruki
1
Wyświetlenia
256
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The box can hold approximately 45g of silica gel. 

It has a locking mechanism to prevent the lid from falling off. 

To open, a fingernail or tool is needed to lift and remove the lid.

 

Very important

slicer setting

I printed with PETG

Wall loops: Set to 3.
Top shell layers: Must be set to 0 layers. 
Bottom shell layers: Must be set to 0 layers. 
Sparse infill density: Set to 30%.
Sparse infill pattern: Cross Hatch or Rectilinear
 

 

 

By strictly following these red-boxed settings, you should achieve a successful and accurate print.

 

2025/02/24

Improved ease of opening the lid

Tagi