1 / 1
CORE One(+) Purge/Trash Bin - Remix for 14 mm x 1 mm magnets — zdjęcie 1

CORE One(+) Purge/Trash Bin - Remix for 14 mm x 1 mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small bin for trash, such as purge lines

Ocena
4,857 / 5
Polubienia
57
Pobrania
210
Wydruki
7
Wyświetlenia
1386
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Great little bin. I happened to have a bunch of 14mm x 1 mm magnets lying around, so I did a quick remix for that size. In my hands, magnets seem to vary quite a bit in actual size, even within one batch. The holes are sized for press-fit, but based on your actual magnet size and printer tolerances you may have to scale the model by a half percent up or down, or use super glue for the magnets.

I would suggest printing with ASA or PCCF. I also include a 3mf file with color change, to add some accent color on top.

For the alignment screws, I used two M3x6 screws.

STEP file included.

Tagi