CORE One(+) Purge/Trash Bin - Remix for 14 mm x 1 mm magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small bin for trash, such as purge lines
- Rating
- 4.857 / 5
- Likes
- 57
- Downloads
- 210
- Makes
- 7
- Views
- 1,386
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Great little bin. I happened to have a bunch of 14mm x 1 mm magnets lying around, so I did a quick remix for that size. In my hands, magnets seem to vary quite a bit in actual size, even within one batch. The holes are sized for press-fit, but based on your actual magnet size and printer tolerances you may have to scale the model by a half percent up or down, or use super glue for the magnets.
I would suggest printing with ASA or PCCF. I also include a 3mf file with color change, to add some accent color on top.
For the alignment screws, I used two M3x6 screws.
STEP file included.