1 / 7
Plano Convex 50 mm Diameter 300 mm Focal Length Lens for SLA Printer or Finer Resolution — zdjęcie 1
1 / 7

Plano Convex 50 mm Diameter 300 mm Focal Length Lens for SLA Printer or Finer Resolution

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plano convex lens designed with open-source Optical Ray Tracing software and Fusion 360.

Ocena
0 / 5
Polubienia
7
Pobrania
67
Wydruki
0
Wyświetlenia
410
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

An attempt at making telescope quality optical lenses with a SLA 3D printer!  As can be seen in the photos, the resolution was just not good enough.  Additionally, there is likely waviness throughout the thickness.  Crystal Clear resin was used, but there are still layer lines.  Several post-processing techniques were also considered but were not efficient.

This lens was designed by Falling Entropy using open-source Optical Ray Tracing software and Fusion 360.

Please let me know if you try to fabricate it, would love to hear about it!

Two files are provided, one with and one without supports.

Tagi