Samsung Galaxy S25 Voronoi case - New v1.3 - Smartphone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first Samsung Galaxy S25 smartphone case now version 1.3 with voronoi pattern.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 982
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first Samsung Galaxy S25 case - Voronoi - version 1.3 (now repaired and optimized)
No support is required in the slicer settings :-)
The yellow parts in the second picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.
Version v1.3 (1,6 mm thickness) changes:
Camera cutout and Microphone holes optimized.
The previous version had small open structures and is now repaired.
The Voronoi pattern is now better fixed around the camera and the light (flash).
Maybe it needs still improvements - please give me feedback.
I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.
See also OrganicLoop - version 1.9 --> https://www.printables.com/model/1228855
and Hexagon - version 2.1 --> https://www.printables.com/model/1325213
I’d always happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!
Happy Printing
Toni :-)
----------------------------------------------------------------------------------------------------------------
Dies ist meine erste Samsung Galaxy S25 Hülle - Voronoi - Version 1.3 (jetzt repariert und optimiert)
In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)
Die gelben Teile im zweiten Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder manchmal etwas schwierig sein
Version v1.3 (1,6 mm dicke) Änderungen:
Kameraausschnitt und Mikrofonlöcher optimiert.
Die vorherige Version hatte kleine offene Strukturen und ist jetzt repariert.
Das Voronoi-Muster ist jetzt um die Kamera und das Licht (Blitz) besser fixiert.
Vielleicht bedarf es noch Verbesserungen – gebe mir bitte Feedback.
Ich benutzte Filament TPU härte 95A und Slicer Temperaturen -> Düse: 220 °C, Bed: 50 °C. Für einen guten TPU-Druck sollte das Filament trocken sein.
Siehe auch OrganicLoop Version 1.9 --> https://www.printables.com/model/1228855
und Hexagon - Version 2.1 --> https://www.printables.com/model/1325213
Über ein „Download”, „Like”, „Make”, oder eine „⭐⭐⭐⭐⭐”-Bewertung würde ich mich immer freuen!
Viel Spaß beim Drucken
Toni :-)