Flexi Articulating Worm and Apple Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexi Articulating Worm and Apple Container
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 338
- Wydruki
- 2
- Wyświetlenia
- 1324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you like my designs, you can donate to help me with future designs via this link paypal.me/PrintyMcPrintface16
This is an extremely satisfying flexible worm fidget toy with an apple that doubles as a storage container.
This model is for Private Use only. If you wish to sell any of my designs, subscribe to my Patreon for a commercial license that will allow you unlimited prints for sale while you are a member
https://www.patreon.com/c/printymcprintface/membership
3D printing settings
As with every design, make sure the STL is touching the print bed before slicing. Depending on the software used, they can sometimes leave a very small gap between the model and the print bed which will cause issues. This model was printed using orca slicer.
The Worm and Apple print without supports and seem to do fine with a .2 layer height. For higher resolution on the top of the apple, consider lowering the layer height to .15 although this will increase print time.
The Stem needs to be printed with tree supports and needs a layer height of .12 for strength and detail.
Consider a drop of glue in the hole for the stem to use it as a handle.