Under Gravel Anchor For Aquarium Plants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do your aquarium plants keep floating away? Burry this in the gravel and attach the plants to it with a Ziptie.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Intro
This little gadget is designed keep your aquarium plants planted. Affix your plants to the post, then burry the disk in the gravel. It works with zip ties or twine. The weight of the gravel on the disk will keep your plant in place until its roots grow in.
This design was originally inspired by a design featured on the aquarium coop YouTube channel: Anubias Anchor by JMC - MakerWorld.
Printing
Prints well without supports but it does have a small (5 mm) bridge.
Feedback from users has been that the small amount of air trapped inside the model doesn't seem to impact performance. However, trapped air can be reduced by printing with solid infill or by drilling a little hole into gyroid infill.
Enjoy
This design is still being experimented with, feedback welcome!