ZOHD Drift DJI Vista Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a DJI Vista mount I made for the ZOHD Drift. It replaces the GPS canopy,works great for keeping the CG where…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a DJI Vista mount I made for the ZOHD Drift. It replaces the GPS canopy, works great for keeping the CG where it should be and the vista gets plenty of airflow to keep cool.
I have this setup with a pan servo right in front of the wing screw. So nice being able to look around wile I am flying. You might be able to mount the camera in the very front in the stock location if you use the optional extended camera wire, but I think it will be stretched.
I have also included two camera mounts, one for the normal DJI Camera or Nebula Pro, and one for the Normal Nebula. these are not my design, they were designed by Qrome (https://www.thingiverse.com/qrome/designs) I used a 180 degree servo and these mounts can screw onto the four arm servo horn or round servo horn that is included with most servos.
The Drift is a great platform that is tons of fun to fly, I have been using the ZOHD 18650 2s pack and have been able to fly 45 minutes with this setup. I am also using a Matek F411-WSE flight controller with iNav. So many great options with this setup like auto launch and return to home. I really like using the nav cruise mode, it will maintain altitude and heading and then you can use the pan servo to look around at everything.
Category: R/C Vehicles