Wanhao i3 CR-10 Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to make use of a CR-10(MK8) hotend on a Wanhao i3, using this part as a carriage. The file you need…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is designed to make use of a CR-10(MK8) hotend on a Wanhao i3, using this part as a carriage. The file you need isHemera_X_Carriage_360_V2.stl.
Last two pictures are print samples with flex filament, at 60mm/sec, with retraction enabled.
Print Settings
Supports:
Yes
Resolution:
0.2
Infill:
20%+
Filament: - PETG/ABS
Notes:
Print objects in default orientation for best results.
Use supports on everything but standoffs.
PETG should be used for most parts since they are around hotend. ABS is suggested for print fan duct.
Post-Printing
Parts
CR-10 style hotend. I used/designed the parts around this one
https://grobotronics.com/all-metal-hotend-kit-with-heater-block-for-creality-cr-10-printers.html?sl=en
30x30x10 Fan for hotend cooling
5015 Blower Fan for print cooling
A few M3 hex nuts/bolts to secure everything together. Use a couple of zip ties to cable manage as well.
Use stock motor/extruder clamp.
Category: 3D Printer Extruders