Liczymy pasujące modele…
Profils téléchargeable, à dézipper avant d'importer dans cura Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy Print in place ! The Ultimate Fidget Avocado keychain
23/02/2022 : Mise en ligne 02/03/2022 : V2 Optimisation refroidissement Voici mon Profil PrusaSlicer pour imprimer en dual color avec la Wanhao D12 d'origine ce profil peut être amené à évoluer si j'affine mes réglages au cours du temps.…
This is a DXF file that can be used to create (either by milling, cutting, or by using hand tools) a y-carriage compatible with the Prusa Mk3 Mk52 Heated Bed. This carriage will work on the Mk3, as well as the Wanhao Duplicator i3 and i3…
Printer: Wanhao D12/230 Rafts: No Supports: oui Resolution: 0.2 Infill: 20 Filament utiliser: Wanhao couleur filament: Black Filament materiel: PLA
Storage drawer for Wanhao D12 230 printer. Internal storage: 92 x 92 x 30 mm. Max print size: 147 x 109 x 41 mm.
Buenas, les traigo un remix del viejo y querido satsana, pero para la magna se para mejorar la ventilación de capa y del disipador, hice un modelo para cada necesidad como con los ventiladores originales, 3010 + 4010 blower, como mejoras…
Mini Wanhao D12 230 Simple representation of the Wanhao d12 230. Model composed of 7 parts and for customization a drawer and a BL TOUCH. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required…
UPDATE : I uploaded a new version that allows to mount a BL Touch probe, see in “Remix” section Hi, This is a complete X carriage design for Wanhao D12 printer, which produces much better overhangs . It uses a twin 5015 blowers system to…
Hi, This is a complete X carriage design for Wanhao D12 printer. It uses a very light and compact twin blower system for part cooling that can be used as a bowden setup or as a direct drive with an Orbiter V1.5. Designed for a Dragon…
Spool ring for Wanhao cardboard filament
Protège câble de plateau Wanhao d12 230 pour éviter qu'il ne se torde
This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube. My goal is to…
Couldn't find a tensioner for the Wanhao Duplicator i3 Plus Mk2 (only i3 Plus, which has a different carriage design) so I made one. It has the correct standoff from the carriage for good belt alignment, and is low enough that it doesn't…
This version of the very popular fan shroud blends the updated mount brackets spacing of the original and the visibility mod to be able to see the Nozzle. It combines the best of these two: http://www.thingiverse.com/thing:1025471…
Handle for 3D printer Wanhao D12 230
Wanhao scraper that can be printed in dual extruder
J'ai développé personnellement mes propres guides fils pour chacun des extrudeurs de ma D12 car je n'utilise pas les supports d'origines que je trouve trop petits et pas assez fiables (résistance au déroulement). Ces guides fils…
Remixed to reinforce the neck and mount to make this filament guide stronger. I had two break on me. One while moving the printer, one when loading/unloading filament. This will require two M3 10mm or M3 12m screws as the base is thicker…
Autofill Adapter for Elegoo Jupiter Female thread to fit Monocure, MACK4D, Wanhao, Monoprice, eSun and probably other premium aluminum resin bottles. Male Thread to Elegoo/Anycubic/Prusa (old) brown resin bottle type. Double check your…
Des tiroirs pour recycler les bobines de filament Wanhao. Vis de maintien disponible ici : https://www.printables.com/fr/model/540107-holder-for-wanhao-spool-organizer
This is a reworking of the Wanhao i3 Plus (Cocoon Create Touch) Z axis and X axis. This design came about because I had to check the X-axis idler pulley, which is very, very hard to access on an I3 plus!!! Why should you install this?…
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select Just to clarify this thing was primarily designed as a vibration dampener to reduce ghosting\ringing by reducing vibration transfer from the work surface but may also…
Update: 22_03_18 File: BD62-3mm_22_03_18.stl Raised base of duct an additional 3mm from the Build plate to allow greater clearance if using Bulldog Clips to hold glass plate down. Clip nearest to home may still require pulling off a…
BL Touch cover BL Touch cover use for WANHAO D12 to reduce the light emission caused by the LED. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Speed: 40 mm/s (you can do much more) Perimeters: 3 Support: required Infill:…
v2 as ready to print less part (integrate sherpa mini mount ,more stong, with 2 4010 fan, with out standoff but passing screw and m3 threaded inserts i had soon as possible more info.. happy print skinny carriage for wanhao gr2,…
I'm having a bad week for print-in-place designs, so after failing to get a couple existing ones to work, I came up with this. The design includes an 2.4mm (0.09") offset between the parts to accommodate the scrap Plexiglas I had on hand.…
Update on 4/10/2017: Use the new Corner_Bracket_v2.3.stl file. From much testing and use of my iterations on this bracket, I have found that additional strengthening was needed to prevent the bolts from bending the bracket outward when…
This is an extruder upgrade for the Wanhao/Monoprice Duplicator i3 Mini (NOT FOR Monoprice Select Mini). This supports flex filaments as well as stronger feed of PLA and PETG (no slipping). This will get you a consistent extrusion. Note…
Wanhao Duplicator i3 V2.1 E3D Titan Aero Upgrade. Upgrade your Wanhao Duplicator i3 V2.1 to use E3D's Titan Aero ! Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/ I have also added in a few modifications to…
redesign fan duct to direct air nearer to nozzle I printed using eSun Petg no support or brim needed, just lie flat on the fan mount side
Support de bobine effet Bambulab pour Wanhao d12 Je n'aimais pas les supports de bobine de la d12 donc j'ai modélisé ceux-ci sur le modèle de la Bambulab Marche aussi avec les bobines de carton
Updated Version with stronger "Ears" and another model printable without support uploaded This is a ribbon cable holder and should prevent the cable from breaking at the lower weak spot. As well it should prevent the cable from…
Support spatule pour imprimante 3D Wanhao d12
X Axis Belt Tensioner for Monoprice Maker Select V2 (Wanhao Duplicator I3 rebrand) Wasn't happy with any of the many existing X tensioners for this printer either having clearance issues with my other mods, or having a bolt that's far off…
Support sans double face pour fixer une webcam sur l'axe X des Wanhao D12 (Testé sur une D12-230)
I wanted a set of Z-braces mostly so that I could align the Z-tower accurately. Turns out this design also makes for a very rigid structure. These braces were designed to take up as little space as possible, so that they could fit inside…
Mini Wanhao D12 230 Simple representation of the Wanhao d12 230. Model composed of 7 parts and for customization a drawer and a BL TOUCH. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required…
After getting my Prusa MK3S+ I wanted to improve the quality of my older MonoPrice Maker Select Plus machines. I've always struggled with an uneven bed and some exterior wall artifacts. I also found some wobble in the x-carriage. This…
Print 2 object and it'll be easier for you to adjust the level of X axis by setting the Z screws. Just place it under the X-axis rods and go down with the Z-Axis. Once it's touching the inner diameter, it means everything is set. Hope you…
Collection de refroidissements alternatifs pour la tête Wanhao D12 direct drive Contenu : A) Fan duct original Reprise du modèle d'origine : modèle original, blower 4010 d'origine évolution du modèle original permettant de recevoir un…
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-end, You can continue to use the stock ribbon cable. All that is needed is to buy a second ribbon cable breakout board…
Important : This model was only tested on the Wanhao duplicator I3 mini, it should work on any clone with the same fixation. Please, post a comment if it doesn't quite fit or if it needs a modification to work on your printer. Reasons :…
This is a remix of https://www.thingiverse.com/thing:2750908 originally made by parhamdb . It also uses the mounting tabs from https://www.thingiverse.com/thing:1686028 by mmoore0 . Before I got a Prusa printer, I had a Monoprice Maker…
I re-designed Pawpawpaw85's strain relief to have a lower profile so there is zero chance of nozzle coolers interfering at maximum Y-extension when using PEI/Buildtak adhered directly to the heatbed. This design has an elongated nut-trap…
Rotate to print flat side down. I used 20% infill, no need for more. Very quick and small print. The screws that come with the BL-Touch will cut their own thread, you may need slightly longer screws for your extruder fan as it mounts to…
This is a mount for a filament run out sensor for the Wanhao I3 or Monoprice Duplicator I3 series of printers, I have it mounted on a I3 Plus but it should fit the V2.1 also. It is made to fit most sensors but I used this one -…
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed. I reverse engineered the part from a very close to fitting…
Logo rhino Wanhao france J'ai modélisé le logo de Wanhao! Vous connaissez surement le célèbre site français https://www.wanhaofrance.com !!! Donc voici leur rhino préféré! Je l'ai modélisé sur Blender Il y a 3 modeles disponible avec 3…
I'm upgrading my Wanhao Duplicator i3 v2.1 printer and needed a box that would attach to my printer. couldn't find anything so i modified Stonecold's excellent Bear case (…
update v3 14.11 I correct tollerance, strength and washer thanks to those who tested it who gave me advice on how to improve this part have to be strong 6 perimeters 6 top 6 bottom with pc blend cf
Wanhao I3 Duplicator BLTouch Bracket When I was upgrading my Wanhao Duplicator I3, I looked into adding bed levelling to the printer. To do this, I used the BLTouch unit and upgraded the Wanhaos firmware to incorporate this sensor. Doing…
Decided to upgrade my Wanhao Duplicator i3 from the Melzi to the RAMPS board in order to add the BLTouch sensor. Since there wasn't that many great cases for this setup I decided to create something from scratch. The original control box…
This is a remix of the TUSH2 spool holder by spongybob1958 to replace the spool holder on top of the Wanhao Duplicator i2. It makes it easy to use spools with varying sizes and inner diameter. Also included is my remixed spool holder arms…
The file Wanhao d12 230 - P_5010_2xBlowers_BLTouch - CarriageSupport should be printed with tree supports, at .2 to .16mm. The file Wanhao d12 230 - P_5010_2xBlowers_BLTouch - FanDuct can be printed without any support, at .2 to .16mm.
I have performed a mayor upgrade to my Wanhao Duplicator 5S Mini. The upgrade have thrown out almost all of the original electronics to get this printer to be a lot better than it was before. The included document is the process and stops…
I mad this wheel to guide filament if the spool is set up on the control box instead of on top.
Remix from https://www.thingiverse.com/thing:2894973 , which is sized for the Maker Select Plus/Wanhao Duplicator i3 Plus. Screw holes match the 40mm width of the Maker Select v2/Wanhao Duplicator i3 v2. The BLTouch mount clears the…
The Cable Chains on the MP Maker Select V2 are not being properly utilized in factory form. Chains need to be constrained, so that they ‘unroll’ gradually across their motion, to spread cable flex out along its length and extend lifetime.…
Modèle à visser pour assembler mes recyclages de bobines Wanhao vides. Ajout également de rallonge pour 1 ou 2 bobines supplémentaires. Tiroir disponible ici : https://www.printables.com/fr/model/540116-tiroir-pour-organiseur-bobine-wanhao
J'ai retravaillé les pattes de maintien pour que les 3 cordons de la tête de la D12 (avec BL Touch) puissent passer. J'ai aussi adapté les deux extrémités de la chaîne. Ma configuration (D12/230): 28x ribbon chain link 1x chain end 1x…
a shorter version of mediamans filament guide as i found it to be a bit too long for the original spool holder, giving the filament some stress/tension at the guide ball, especially when having a near empty spool, causing the filament to…
i just put files together all credits go to outoftimejr and cnorrick Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 50 Notes: abs Category: 3D Printer Parts
Remixed to reinforce the neck and mount to make this filament guide stronger. I had two break on me. One while moving the printer, one when loading/unloading filament. This will require two M3 10mm or M3 12m screws as the base is thicker…
here is a great 40mm alternitive to the stock cooler. i printed it in pla and tested this on some long builds (12 hours+) and no melting . worked great.. i also added a lowered one . its 0.50mm lower to realy get it as close to the plate…
PTFE Tube cutter use a Razor blade and use slot 1 and 2 like a pencil sharpener Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25 Category: 3D Printer Parts
Imprimé en 0.2mm, vous pouvez vous permettre de mettre une vitesse plutôt élevée, sachant qu'il y a beaucoup de lignes droites. donc pour une bobine, vous devez imprimer 2 exemplaires de chaque fichier. (4 au total)
Wanhao I3 Duplicator Camera Mount I really like the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by sneaks, so much so that I decided to create a mounting bracket for the Wanhao so I could reuse the articulating arm. The…
This is a mirrored BLTouch Sensormount designed by dot_bob. For the Duplicator 6 plus the left side would be better because the printhead fan is disturbing the rightside Sensormount. Please be aware that you have to adapt the marlin…
This is one of my older designs I did a few years ago. It still gets quite a few hits on Thingiverse and I figured it might help a few people here. UPDATE 2: Wow! Been awhile and I'm glad to see my files have helped a few people. I have…
I recently printed OneTrueMyth's Tool Caddy for my Prusa Mk3S and liked it a lot. Then I glanced over at my trusted Wanhao i3 and thought "mmh, this may actually look pretty good on the i3 too." So an hour later, the tool caddy was outfit…
Simple thumbwheel for Duplicator I3 and Cocooncreate machines. The thumbwheel has an embedded M3 nut dimensions 5.97mm (flat to flat) and 2.50mm high. You will need to set your slicer software to pause at around the 3.5mm - 3.6mm mark…
Finally as much cooling air flow as you want thanks to the EBM-PAPST RLF35-8/14N blower. Version 11 M12 with stronger attachments on the left side. Version 10 M12 has an internal fin to direct more air out of the middle nozzle. This…
Here is a reusable mold for a silicone boot for the Wanhao D6/ Monoprice Ultimate printers thanks to the original files by 1bigpig. It can easily be assembled and taken apart. Also increased the size of the cutouts for hot end and nozzle.…
This is a remix of two other parts: From cyul: https://www.thingiverse.com/thing:1635585 From Nerys: http://www.thingiverse.com/thing:1598317 I matched Nerys's filament guide with cyul's spool bracket to create the filament holder to work…
I have not been using a part cooling fan lately and have not had any issues so i designed a minimal lightweight hot end mount. I may design a compatible part cooling fan part when the need arises. Uses the original m4 hardware to mount to…
Medieval Direct Drive cover for Wanhao D12 230 Wanhao D12 230 Direct Drive cover in medieval style, with the option of incorporating LEGOs. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30% -…
VERSION 4 now!! - Custom Cooling duct for Wanhao Duplicator D9. Cleaned up the design, lowered the duct holes below nozzle Working perfectly well compared to stock.. Please post the feedback how you liked it or if any improvements. NOTE:…
This is a replacement bracket for the Y axis pulley on the Wanhao Duplicator i3 and clones. The stock bracket can flex during print, as well as bend over time, creating wavy lines on the print surface and added noise. This design is based…
This is a set of feet for the Wanhao Duplicator i3 Plus printer. These should be printed in TPU to provide stiffness plus vibration absorbing and also to stop any movement or creep during printing. You require x8 in total to provide the…
I wanted to save some filament and time to print, so I hollowed out the filament holder but kept the strength to carry the weight of a full roll. Print with 3 walls and 5 top and bottom layers. TinkerCAD file:…
The ribbon cable and the wires for my Bltouch kept breaking. For that reason I decided to install a cable chain on my 3d printer. This prevents the wires from getting damaged, and also makes the printer look much nicer, at least in my…
Korzar designed a very useful 120mm fan mount for the Wanhao Duplicator i3 control box, but unfortunately it is not very suitable for those of us with the older non-sloped front style control box (from V1 and some V2). Also there are a…
I wasn't happy with the existing filament guides available, so I whipped this model up for the Wanhao i3 Duplicator. It is completely rounded in the loop portion and has no opening. It's fairly sturdy and guides the filament well. It…
Updated Design 2022 The X-Axis Gantry on the Maker Select can be a little wobbly, since the span consists of only the 2 x-rods, with their ends only held in by 1 set screw each. This Brace uses a threaded rod to help stiffen things.…
This is my mod for the Rook 2020 to make it use parts from a Wanhao Duplicator I3 Plus Extrusion lengths are: 8x300mm for top and bottom frame 4x350mm for the Z-axis. Printhead in mounting ordbiter v2, trianglelab TCHC TR6, 2x5015, 1x…
A little block that doubles up the mounting point of the x-axis rails where they connect to the Z-Axis. With the original mounting blocks I found that it is possible to rotate the sheet metal piece around the z-axis, affecting accuracy of…
Technically, this isn't a remix, as it is an entirely new model, however the idea is based on previous versions, such as the remixes of PlasticCow's original belt tensioner by JF Chabot, Amzak, AlexWYYC, and others. Main features are:…
Yep, sorry. More square nuts. You should buy square nuts anyway. They are very useful way of attaching things to prints, and easy to include in a design. :P Anyway, these rod holders are to replace the little aluminium rod holders. They…
Dead simple tool that hangs from the X-axis rods and can give accurate positioning relative to the y-axis rods. Probably the most accurate method of aligning the X-axis carriage of these printers. Print Settings Printer Brand: Wanhao…
I needed a better spool holder for my printer as the stock holder could nto fit a 1kg spool of prusament, The spool holder snaps into place on the metal frame and can easily hold a 1 kg spool. There is a possibility to insert a small rod…
Side clip from: https://www.thingiverse.com/thing:1718783 A basic filament guide designed for the side of your Wanhao i3. Useful for those who locate the spool beside or below the printer. Print Settings Printer Brand: Wanhao Printer:…
A simple cable guide for the heatbed wires on a Wanhao Duplicator i3. Snaps on to the back of the printer and uses a zip tie to hold the cables down. Easy & fast print. Category: 3D Printer Accessories
Print them in ABS or PETG. X_Cariage and PCB_Mount need supports. The Fan_Duct from : https://www.printables.com/model/146957-mad-modular-air-duct-for-biqu-h2-h2-v2s-revo-h2-v2/files
Remplace le capot d'origine en métal, plus lourd. La cale de montage sur le moteur est incorporée. Emplacements pour inserts de fixation du cable RJ45 (2x M2x4x3,5). Filament : PETG/ABS. PLA non recommandé à cause de la température élevée…
This mount allows you to attach a Wyze camera to a Wanhao Di3 without any need for tools. Easy to adjust or remove. Mine is mounted on the backside of the left rail, looking toward the front right corner of the printer, but it can go…
I found the z-axis alignment bars by Coder-Tronics very useful but needed a place to keep them. So I came up with this simple solution. The cut-out for the bars is designed to be very narrow in front so you'll have to bend the sides a bit…
Este es un remix adaptado a mi Wanhao D6 Plus para que el filamento este mas alejado del gabinete de la impresora, y asi alinearse con el centro de las bobinas, esto reduce los atascos y nudos del filamento. This is a remix adapted to my…
These feet eliminate vibrations transferred from your printer to the work bench/table, cutting down on noise without needing to buy a paver and a foam pad. Printed with no supports at 0.2mm layer height in PLA. You will need print 2 as…
I have removed the spools from the back of my printer and mounted them above. What remains are the holes where the reel holders once lived. I don't like open holes to the internals of my printing cavity, so I designed these plugs to seal…
Nettoyage de la tête via servo moteur, montage sur klipper et wanhao D12 500. https://www.amazon.fr/dp/B07RZK4K39?psc=1&
![Mini Wanhao D12 230 [Version Card Kit]](https://media.printables.com/media/prints/527746/images/4264074_0f653d59-0acc-4070-ab76-e09434d51abf/20230429_165557.jpg)
