Wanhao I3 Duplicator BLTouch Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket for the BLtouch bed leveling probe, targeted at the Wanhao i3 Duplicator V2
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Wanhao I3 Duplicator BLTouch Bracket
When I was upgrading my Wanhao Duplicator I3, I looked into adding bed levelling to the printer. To do this, I used the BLTouch unit and upgraded the Wanhaos firmware to incorporate this sensor. Doing this, I found that none of the Thingiverse BLTouch mounts fitted my specific printer due to the metal bracket being longer than the usual bracket. So I redesigned the frame and created the one shown above and below.
Marlin Firmware Probe Offsets
#define X_PROBE_OFFSET_FROM_EXTRUDER 52 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -46 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -2.72 // Z offset: -below +above [the nozzle] Equipment List ==============
- BLTouch Kit
- Dupont Crimps
- Multithreaded cable
- No extra bolts are required; the original ones are fine
- Bolts and Nuts come with the BLTouch for mounting on to the bracket
Useful Links