Wanhao i3 Y Axis Pulley Bracket (Strengthened)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement bracket for the Y axis pulley on the Wanhao Duplicator i3 and clones. The stock bracket can flex…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a replacement bracket for the Y axis pulley on the Wanhao Duplicator i3 and clones.
The stock bracket can flex during print, as well as bend over time, creating wavy lines on the print surface and added noise.
This design is based on Amkza's, but is modified to allow printing standing up, hence the extra strength. Various bits and pieces are also thickened and filleted.
Many thanks to Amkza for sharing his design.
Compatible with the front Y brace from Azza's Z brace mod.
UPDATE - Version 1.1 with more clearance for the pulley bearing.
Print Settings
Supports:
No
Resolution:
Thick layers. Recommended 0.28mm.
Infill:
High infill. 50% or more.
Notes:
The holes may need cleaning up with a drill.
Don't forget that holes will need to be drilled on the printer - and yes it's well worth doing.See Amkza's original design for more instructions, as well as a drill template.
Amkza's spacers are not needed with this remix.
Required:
1x bracket (this STL)
1x drill template (optional, from Amkza, alternatively you can just use this bracket as a drill template)
1x bearing pulley (the stock one)
1x M5 35mm screw
1x M5 nylock nut (the stock one)
6x M3 10mm screw
6x M3 nut
12x M3 washer (optional)
Category: 3D Printer Parts