Wanhao i3 Plus frame for BTT SKR E3 Mini V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-end, You can continue to use the stock ribbon cable. All that is needed is to buy a second ribbon cable breakout board and use that inside the base to convert the ribbon back into standard connectors. The breakout board is available from several sources online, but I use the Ultimate 3D Printing Store.
The metal L brace that that separates the Y axis belt from the Melzi control board can either be removed, or in my case I re-drilled it to move the brace closer to the belt to make room for the lattice frame and the BTT SKR controller.
The lattice frame will hold the following
• BigtreeTech SKR Mini E3 V2 controller (or equivalent)
• Mosfet for bed power
• Wanhao I3 Plus ribbon cable breakout board
• 4020 or 5015 blower fan
• Micro to standard SD card reader
• Micro USB to female USB cable
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
No
Supports:
No
0.2mm
Infill:
30%
Filament:
ANY PETG or PLA ANY
Category: 3D Printer Parts