Wanhao i3 Plus frame for BTT SKR E3 Mini V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 61
- Makes
- 0
- Views
- 967
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-end, You can continue to use the stock ribbon cable. All that is needed is to buy a second ribbon cable breakout board and use that inside the base to convert the ribbon back into standard connectors. The breakout board is available from several sources online, but I use the Ultimate 3D Printing Store.
The metal L brace that that separates the Y axis belt from the Melzi control board can either be removed, or in my case I re-drilled it to move the brace closer to the belt to make room for the lattice frame and the BTT SKR controller.
The lattice frame will hold the following
• BigtreeTech SKR Mini E3 V2 controller (or equivalent)
• Mosfet for bed power
• Wanhao I3 Plus ribbon cable breakout board
• 4020 or 5015 blower fan
• Micro to standard SD card reader
• Micro USB to female USB cable
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
No
Supports:
No
0.2mm
Infill:
30%
Filament:
ANY PETG or PLA ANY
Category: 3D Printer Parts