Adjustable Z end stop - CCT / Wanhao Di3 Plus / Monoprice Maker Select
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 592
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed.
I reverse engineered the part from a very close to fitting design by kapral_82. The process is covered in the linked video.
Post-Printing
Upper - add two bolts: M3 x 10mm as a retainer and M3 x 30mm as the end stop screw. Cut the thread carefully the first time you insert them.
Lower - press in two M3 lock nuts. Use M3 x 10mm bolts to hold to printer frame.
How I Designed This
Category: 3D Printer Parts