Liczymy pasujące modele…
Mount fot cctv camera that enables the possibility to mount it to a corner of a building. Reccomended for the camera to be a 360º or a rotating camera. If neded any modifications for the mounting holes don't hassitate to ask.
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
I got some PTZ security cameras and as the main mount on them is for flat wall the angle of view is not perfect if they are not on the corner of the building. when I found out the original bracket is too expensive i thaught why not print…
Wydruk około 5,19 €–6,34 € nettoWstępna wycena jednego wariantu
CCTV sign with an icon and two different texts I have printed it with: Printer: Original Prusa i3 MK3S with MMU2S Filament: Prusament PLA Prusa Galaxy Black, Polymaker PolyTerra PLA Cotton White Infil: 15% No Support, Raft, Brim, etc.…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Imported from Thingiverse. "CCTV" Enclosure for Raspberry Pi Zero W with pi camera module v2. See images for printing orientation. All parts snaps together. Includes a wall mount for screws or double sided tape. Print instructions Print…
Amazing detail in this model by Chelsea Creates Things. Supposedly can print with no supports… I didn't have luck and so this was my first print with the new organic supports.. pretty cool…
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Start by making my 4x microscope adapter for your camera: https://www.printables.com/prints/143754-microscope-adapter-for-4x-macro-photography-with-s Then add this particular 4x objective (only this one is supported) to it:…
Pole mount for dahua cctv cameras, it is designed to hold the cameras with the rounded base by inserting a nut and an M5 screw. To mount it to a pole you will also need a U shaped bracket, as the one used to hold antennas. I hope it's…
This is my recreation of the CCTV camera from Rainbow 6. The design uses a twist lock mechanism. Use #8 screws or double-sided tape to attach the mount plate to the ceiling. Press fit the dome into the body then twist the assembly onto…
PLEASE NOTE BEFORE PRINTING: CCTREE CARDBOARD SPOOLS MAY EXCEED THE AMS WIDTH LIMIT. You may be able to sit the spool in the AMS however the rotation may be obstructed due to the width of these spools. This adapter system wraps the edges…
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Make a nice customizable cake topper 8-) You will need OpenScad, it's a free program. Download it from here Open the file and change the text variable: text = “put your text here”; Adjust angle for to center the text: text_angle=-80; When…
Esta flauta esta diseñada para la practica de la digitación. No se puede soplar y por tanto no produce sonido. Con el COVID no pueden estar todos los chicos y chicas en la clase soplando a la vez. Lo mejor es imprimirla en vertical. No…
I recently installed an external CCTV camera under a gutter (Eufy 2c Pro in this case). Despite its semi-protected position, I designed a weather cover/hood to provide more protection from the elements. I've created two versions. A…
This is a sign to tell unwanted visitors of your property, that you have active CCTV cameras running. The sign is in German telling “property video monitored”. This model is optimized for a 0.3mm layer height. This keeps your print time…
Print with a colour change.
The model allows multiple camera connections to be grouped in a single compact box, improving cable management, reducing clutter, and providing a cleaner and more professional installation. It is suitable for setups where coaxial or UTP…
Dummy cctv camera with option to add led. Just download the stl or 3mf file and print according to color as in image. You can use the step file to make changes. Just stick a small piece of old xray film to cover the lens hole which should…
CCTV Punks an Art Toy Collection by Mehdals
CCTV logo to display on a door. 0.2 mm layer height. Change color at 2.2 mm.
Fake CCTV camera. Affix to your marquee or tent! might deter someone from steeling your property. Or use it around the house / garage / workshop. Use a short length of threaded rod, screwed into the bottom off the antenna and then screwed…
Introducing the Ergonomic Wall Mount for CP Plus CCTV Cameras, a versatile and practical accessory designed for seamless installation and optimal functionality. This 3D printable mount ensures easy mounting on walls, offering the…
Despues de 3 años de uso del cargador de mi móvil (huawei P30 PRO) el conector había empezado a romperse levemente (seguro que mi gata mordiéndolo y estar arrastrando por el suelo han ayudado) así que me decidí a imprimir un protector.…
Cables cover and MISECU CCTV camera holder - two versions. The first version of a waterproof box for CCTV outside in the rain. The second version without visible wiring, but only for CCTV under the roof, because water can enter through…
Needed a CCTV sign for my shop and home. This sign measures about 8 x 8 and 3/16" thick. Print Settings Printer Brand: Creality Printer: CR-10 Resolution: 0.2mm Infill: 10% Filament: hatchbox pla yellow and black Category: Signs & Logos
This sign can be used to comply with regulations when using CCTV in Denmark. Print is sliced with Prusaslicer with color change at layer 12. Can be mounted with M3 screws. This sign is made by the Customizable Warning Sign script by Stone…
Late Add: an alternative Cord lid, one with only hole for the AC cord If the Housing will be sun exposed then print with PETG PLA will be deformed. The plate, where to mount the raspberry pi has screw holes for RPI-2/3/4 and for RPI-Zero…
Español Adaptador para usar lentes de microscopía de montura tipo RMS en la cámara de Raspberry Pi HQ que usa montura tipo C. También sirve para cámaras CCTV o Bolex que también usan montura C o CS. La primera vez que se monta el lente…
Bracket for DVR
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed. I reverse engineered the part from a very close to fitting…
A warning sign to let people know if you have CCTV operating on your property. Use pause at layer height to change colours, to create the coloured lettering. Category: Signs & Logos
I just wanted to create my own CCTV camera sign, and I noticed that I couldn't find an already made icon of a CCTV camera in the stl format which worked for me. This is why I decided to model such a camera myself. Feel free to use it on…
This can accomodate two cameras. Here there are two models. Version 1 :- Split model without roof, download camera mount v1.3mf Version 2 : - Single piece with roof(weather proofing) that can be attached to this with a 25mm pipe. This is…
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable. Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard. The fan…
I was searching for a screwless filament feeder but that was a twopiece so it could fit into my cctree drybox as the hole is as in the image below I combined this two models https://www.thingiverse.com/thing:1750875 +…
My design of a cctv dahua security camera support. Print instructions Unassociated tags: security camera Category: Camera Summary My design of a cctv dahua security camera support. Print Settings Printer Brand: Any Printer: Any Rafts: No…
Easy to print variant of HeXCupTRiX https://www.printables.com/cs/model/650977-hexcuptrix-hexa-transparent-cup . You are free to change the model in any way, BUT ONLY for YOUR PERSONAL USE!
Camera cover that screws between the camera and holder.
3D Model for CCTV Installation Board with Reference to GDPR Law of 21/03/2007 This 3D model represents a signage board designed to be placed in proximity to CCTV cameras. The purpose of this board is to ensure compliance with the GDPR law…
The CCTREE spools I have, have notches in them. These notches catch on the Bambu AMS feeder rollers, causing feed errors. At worst, I believe this could lead to damage to the AMS. So, these clip in place clips are designed to fill the…
The platform can be installed in the aluminum profile by inserting the platform tilted then snapping it down. The additional support can strengthen the platform but optional. Use M3 self tapping screws.
CCTV NEIGHBOURHOOD WATCHING, sign By request. Category: Signs & Logos
Tested on 0.15mm 50% infill. maybe lesser infill will do. failed on 5% gcode file is for color change effect so you don't have to paint it and it should last forever I also included the fusion 360 file. Maybe you will like to use it in…
Printed in PETG as it will be exposed outdoors. There is a relief on the side because I cannot fit the wires through or remove the connector from the inside (glued). I just removed the old arm using a cutoff disc and a Dremel. I printed…
This is a small mounting ring to attatch an LED ring to a CCTV lense. The front of the lense has a diamter of about 25 mm. The model is quite flexible, so a slightly different diameter should work as well. The LED ring has a diameter…
This is a very specific use case, but I had a Dahua camera designed for a Dahua PFA136 adapter that I needed to fit to a Dahua PFA134 junction box as we didn't want to buy and install a new junction box. The Dahua PFA136 has a larger…
THIS FRIDGE IS MONITORED BY 247CCTV MADE BY MATT GERMAN 200MM X151MM X 3.5MM ,0.3 LAYER HIGHT ,100% INFILL ,WALLS X2 0.8
OMA's bekanntes CCTV Objekt im Masstab 1:1000 als Volumenmodell zum Drucken.
I made this model for IMOU Cue 2 camera. I wanted to create a hood covering SD card slot and the reset button. Made this model in FreeCad after a few trials. Printed in Pure White Numakers PLA+ 1.75mm filament on 0.4mm nozzle Anycubic…
this is an cover for outside usage of camera can be printed in all kind of materials without suport but i would recomand abs for better protection from the sun
By following the instructions in the video, these parts will allow you to use your BLtouch with: Auto levelling at the start of each print in only 30 seconds Accurate/symmetrical spacing of probing points Automatic adjustment for any…
CCTV NEIGHBOURHOOD WATCHING, sign By request. Category: Signs & Logos
Description This sign has a clear and effective design. The bold "ATTENTION" and camera icon make the message instantly recognizable. The yellow background and white text create good contrast, ensuring visibility. Overall, it's a…
This is a mount for a GLEDOPTO RGBCCT LED Controller to attach to 2060 aluminum extrusion. I designed this part to work with OpenBuilds Aluminum Extrusion . I built a workbench out of aluminum extrusion and I needed a mount for my LED…
Print with color change at layer 5 Camera LOGO Sign Sign no Text
Summary resolution 0.2 infill 20% just made one bigger to be used with the fiament dryer cctree which is wider this one is 9.8 cm wide Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution:…
24 Hour CCTV Security Surveillance Sign - I was tired of the stickers I had fading in the sun, so created a perminant model to use.
Simple print, no supports needed. Use 40-50% infill to withstand outdoor climate.
I picked up a small light socket mountable fan and LED light combo at Menards. Got it hoping to cool off the treadmill area in my basement. I wasn't expecting much for under 10 bucks, but it actually works pretty well. So, I made this…
Tired of manually configuring filament settings for every 3D print job? Streamline your workflow and boost your productivity with an innovative RFID solution ( https://amzn.to/472zOhm ) ! An app, paired with readily available RFID tags…
When fitting a CCTV camera to a tile in a suspended ceiling, this base will help spread the load to prevent damage to the tile. It will also help with alignment and drilling holes. Three versions so far: 116mm: Three M4 (4.5mm clearance)…
Easy to print on it's back. I would suggest adding thick walls and top/bottom layers (I used 5 and it was great). I used 80% infill for some extra strength. No supports needed with my PRUSA MINI+ I added an additional utility hole which…
Decent size for a keychain, in my opinion is 80%, and 50% infill You WILL NEED A SCREW-HOOK to attach this to your keychain (show in last picture) If any one needs me to add a loop on the back of this or a printable hole for a screw…
Upgrade the Hornby CCT van with additional brake parts. Also add parts to model the specialist Derby van used at the RTC. Best printed in black PLA using an FDM printer at best quality settings. May work with a resin printer, but the…
I had to do a systems inspection of a railway maintenance yard and thought the tilting CCTV poles would look funny as a pen. I work in security and I was approved to be there and take the photo's. Please don't go wandering through railway…
in a room where courses and conventionals are held, several remote operated Pan/Tilt/Zoom cameras are mounted permanently. In order to show their status as “really turned off/inoperative” (when no recording is wanted), these blinds…
modelo original creado por mi porque no pillaba en ningún lado algún parasol para la cámara, para así evitar que las lluvia no distorsione la imagen cuando cae sobre el lente. recomiendo imprimirlo en pet-g, por que estará en el aire…
coupling conecction 8cm-5cm 75-54mm I used this for air duction of laser gases to adapt some coneections and designs
Norsk (scroll down for English description): Ifølge norsk og europeisk lov må man opplyse dersom man har kameraovervåkning som peker mot private områder hvor utenforstående kan bli tatt opp ( lenke til datatilsynet ). Dette skiltet kan du…
Biete euch hier CC Teelichterhalter an in 2 verschiedenen größen
A small high contrast sign to warn people they are being recorded. There are two versions, one is black and silver only and the other has red letters. You can of course also edit the colors in your slicer to use any color you'd like. You…
This helps the KMOON video doorbell resist rain and wind. Prints with no supports on a Mini+ upwards.
This riser will fit the pictured Annke brand turret camera base, it is 55mm deep with 4.5 mm screw holes no supports are required.
Pasuje na https://www.t-led.cz/p/led-panel-24v-18w-cct-24lw18-kulaty-102202 a dělá z led panelu za 340 Kč přisazené svítidlo. Mým požadavkem bylo 24V CCT přisazené svítidlo, ale to nabízí snad jen Kama a chce za něj kolem 2000 Kč. Vyrobil…
This is a functional remix of the Articulating Desk Lamp . I’ve redesigned the lamp to be wall-mounted and integrated hardware for light temperature control. Key Improvements: Wide Lampshade: Redesigned for broader light distribution and…
this is a locker for cam tensioner lifter in Honda's engines. in my case it's Honda Rebel 300 or CMX300. also will fit to crf250 and the other models with 286cc engine.
needed to mount a cctv ptz camera on a corner of wooden fence post and help protect from the rain to keep watch on a fox den in garden printed in petg no supports needed all holes were tapped out to accept m3 screws m3 nuts and bolts used…
Denver Dash Cam Mount, use double sided tape to attatch.
Simple print, no supports needed. Use 40-50% infill to withstand outdoor climate.
Pasuje na https://www.t-led.cz/p/led-panel-24v-18w-cct-24lw18-kulaty-102202 a dělá z led panelu za 340 Kč přisazené svítidlo. Mým požadavkem bylo 24V CCT přisazené svítidlo, ale to nabízí snad jen Kama a chce za něj kolem 2000 Kč. Vyrobil…
CCTV sign with an icon and two different texts I have printed it with: Printer: Original Prusa i3 MK3S with MMU2S Filament: Prusament PLA Prusa Galaxy Black, Polymaker PolyTerra PLA Cotton White Infil: 15% No Support, Raft, Brim, etc.…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Despues de 3 años de uso del cargador de mi móvil (huawei P30 PRO) el conector había empezado a romperse levemente (seguro que mi gata mordiéndolo y estar arrastrando por el suelo han ayudado) así que me decidí a imprimir un protector.…
Plate for cctv camera for Hama tripod. Sutable for race timming.
The model allows multiple camera connections to be grouped in a single compact box, improving cable management, reducing clutter, and providing a cleaner and more professional installation. It is suitable for setups where coaxial or UTP…
