Adjustable Z end stop - CCT / Wanhao Di3 Plus / Monoprice Maker Select
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed…
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 57
- Makes
- 1
- Views
- 595
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed.
I reverse engineered the part from a very close to fitting design by kapral_82. The process is covered in the linked video.
Post-Printing
Upper - add two bolts: M3 x 10mm as a retainer and M3 x 30mm as the end stop screw. Cut the thread carefully the first time you insert them.
Lower - press in two M3 lock nuts. Use M3 x 10mm bolts to hold to printer frame.
How I Designed This
Category: 3D Printer Parts