1 / 2
Weather station : Solar powered rain gauge - Pluviometer V2 — zdjęcie 1
1 / 2

Weather station : Solar powered rain gauge - Pluviometer V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the rain gauge part of my wireless weather station project version 2, powered by a solar cell.

Ocena
0 / 5
Polubienia
13
Pobrania
101
Wydruki
0
Wyświetlenia
1211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a wireless tipping bucket rain gauge powered by a little solar cell and a supercapacitor.
After calibration test, each swing of the bucket is 1.15mL. Funnel radius is 80mm, then each swing mean 0.057mm of rain (on 1 m²).

 

To build the rain gauge, you need :

  • A rod of 3mm diameter and 30mm length (steel, aluminium...)
  • A reed switch 1.8x7mm
  • A round neodymium magnet 4x2mm
  • Silicone rubber for waterproofness (like kafuter).
  • Strong glue for the magnet
  • 20x5mm round neodymium magnet with hole, for magnetic feet. My rain gauge is on a metal wall coping. If you want another support, draw your own feet part.

Some screws :

  • 2x M4x16 (Extension arm)
  • 4x M4x25 (Feet)
  • 4x M3x20  Sensor box cover
  • 4x M2.5x10  Bucket holders
  • 5x M3x6    Solar cell, sensor and sma holder
  • 4x M2.5x5 PCB
  • 4x M4x10 countersunk (Magnet on feet)

Seal parts are printed with TPU filament.

For the Funnel, be carreful to make a X or Y rotation in your slicer, and not a Z mirror, otherwise the threaded will not work.

 

More details here (in french) : https://www.sanglierlab.fr/2025/02/22/station-meteo-v2-le-pluviometre/

Tagi