1 / 2
Weather station : Solar powered rain gauge - Pluviometer V2 — image 1
1 / 2

Weather station : Solar powered rain gauge - Pluviometer V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the rain gauge part of my wireless weather station project version 2, powered by a solar cell.

Rating
0 / 5
Likes
13
Downloads
101
Makes
0
Views
1,211
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a wireless tipping bucket rain gauge powered by a little solar cell and a supercapacitor.
After calibration test, each swing of the bucket is 1.15mL. Funnel radius is 80mm, then each swing mean 0.057mm of rain (on 1 m²).

 

To build the rain gauge, you need :

  • A rod of 3mm diameter and 30mm length (steel, aluminium...)
  • A reed switch 1.8x7mm
  • A round neodymium magnet 4x2mm
  • Silicone rubber for waterproofness (like kafuter).
  • Strong glue for the magnet
  • 20x5mm round neodymium magnet with hole, for magnetic feet. My rain gauge is on a metal wall coping. If you want another support, draw your own feet part.

Some screws :

  • 2x M4x16 (Extension arm)
  • 4x M4x25 (Feet)
  • 4x M3x20  Sensor box cover
  • 4x M2.5x10  Bucket holders
  • 5x M3x6    Solar cell, sensor and sma holder
  • 4x M2.5x5 PCB
  • 4x M4x10 countersunk (Magnet on feet)

Seal parts are printed with TPU filament.

For the Funnel, be carreful to make a X or Y rotation in your slicer, and not a Z mirror, otherwise the threaded will not work.

 

More details here (in french) : https://www.sanglierlab.fr/2025/02/22/station-meteo-v2-le-pluviometre/

Tags