1 / 6
SNRC R3 Battery Shorty Holder Box Tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I do not like the strap-holder that was provided with the car. So i designed this battery tray. It is 4x adjustable for
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
For assembly 2 of the original screws can be used. You should use 2x 3x6mm for the 2 shorter mounting-blocks. (8mm hole-depth)
The latches should be drilled 3mm for smooth Operation. Further the o-rings and latch should be greased.
If you have Trouble getting the battery out of the battery-tray you can poke it with your fingers from underneath.
Hope this is useful to you. If you need some slight modifications feel free to write in the comments.
