1 / 6
SNRC R3 Battery Shorty Holder Box Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I do not like the strap-holder that was provided with the car. So i designed this battery tray. It is 4x adjustable for
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
For assembly 2 of the original screws can be used. You should use 2x 3x6mm for the 2 shorter mounting-blocks. (8mm hole-depth)
The latches should be drilled 3mm for smooth Operation. Further the o-rings and latch should be greased.
If you have Trouble getting the battery out of the battery-tray you can poke it with your fingers from underneath.
Hope this is useful to you. If you need some slight modifications feel free to write in the comments.
