Extra Long P-SAT Slim Angled Talon Magazine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
P-SAT magazine extended to 24 dart capacity
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 93
- Wydruki
- 3
- Wyświetlenia
- 609
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the idea of the original P-SAT, but I had two issues with it. First, the catch hole was too low for the Nightingale and Venom Pro. Second, it wasn't long enough for me. So I fixed both. This is designed to print on my P1S, so anything with a bed volume of less than 256x256x250 will need to cut a section off of the bottom for it to fit (don't attempt to scale it). As is, with a drum spring you can expect a capacity of 24 darts, 25 if you're fine with some squish. You'll probably need to lubricate the follower to get it to feed smoothly. I used thin silicone oil.
The model is pre-oriented, you just need to add supports. Alternatively, you can use the 3mf file which contains the supports that I found to work on my machine. They might be overkill, I was just tired of failures with my initial minimal support tests and may have overcompensated.
You'll also need to print the base and follower from the original P-SAT.