genie garage keypad repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The flip up door on my genie intellicode garage door keypad broke and after contacting genie their advice was to buy a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
The flip up door on my genie intellicode garage door keypad broke and after contacting genie their advice was to buy a new one. I decided to see what i could do and after about 4-5 iterations this is what i came up with. This is printed using PET-G so good heat and sun resistance and strong. Even with only 10% infill it is incredibly strong I used superglue to attach it to the body and the bevelled edges make it a snap to get the cover on.
For your own sake do not try to put the cover on until the glue has had plenty of time to set.
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/gbKddffgJfy
Print instructions
Category: 3D Printing Print Settings
Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 V2
Rafts: No
Supports: No
Resolution: 200
Infill: 10
Notes:
Use ABS or PET-G to deal with the outdoor weather.