1 / 1
CREALITY K1 | K1C PTFE TUBE GUIDE V3 Remix - Connects 2 tubes — zdjęcie 1

CREALITY K1 | K1C PTFE TUBE GUIDE V3 Remix - Connects 2 tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple remix for when you want to connect your filament dryer directly to the printer.

Ocena
5 / 5
Polubienia
22
Pobrania
137
Wydruki
1
Wyświetlenia
805
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a simple remix for when you want to connect your filament dryer directly to the printer. 

Use a 4mm drill bit if needed to expand the hole.

 

The rest of the parts you can take from the original.

Tagi