1 / 2
Lebois Seat Belt Tensioner alternative Motor Kit — zdjęcie 1
1 / 2

Lebois Seat Belt Tensioner alternative Motor Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts for using a geared motor

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Original article / guide: https://lebois-racing.com/seat-belt-tensioner-gt/

For my taste, the original ungeared 350W motor was a bit too fast, resulting in rough and noisy action. So i tried the geared 250W 24V Variant MY1016Z2 (Amazon, AliExpress) to my belt tensioner, which acts way smoother while delivering a lot more torque due to its 9.7:1 reduction gear.

The output shaft on this version has a 11mm diameter and a 4mm key. I simply made sleeve for the shaft and filed a keyway into the SHF12, resulting in a tight and secure fit.

Also, to give the drum more stability on the motor shaft, I extended the shaft by a M8x20 threaded sleeve (Amazon) and tightened the Drum support end cap with a M8x12 bolt and a washer.

Also, I made a (very basic) remix of the cable guide, acting as a holder for a 40x40 cable eylet (Amazon) which is attached by the two provided bolts and nuts.