Lebois Seat Belt Tensioner alternative Motor Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts for using a geared motor
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Original article / guide: https://lebois-racing.com/seat-belt-tensioner-gt/
For my taste, the original ungeared 350W motor was a bit too fast, resulting in rough and noisy action. So i tried the geared 250W 24V Variant MY1016Z2 (Amazon, AliExpress) to my belt tensioner, which acts way smoother while delivering a lot more torque due to its 9.7:1 reduction gear.
The output shaft on this version has a 11mm diameter and a 4mm key. I simply made sleeve for the shaft and filed a keyway into the SHF12, resulting in a tight and secure fit.
Also, to give the drum more stability on the motor shaft, I extended the shaft by a M8x20 threaded sleeve (Amazon) and tightened the Drum support end cap with a M8x12 bolt and a washer.
Also, I made a (very basic) remix of the cable guide, acting as a holder for a 40x40 cable eylet (Amazon) which is attached by the two provided bolts and nuts.