Little Jeep Car - PIP (Print In Place) without support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little Jeep Car for Print in Place !!! It have a 0.5mm clearance for work with almost every 3d printer!
- Ocena
- 4,933 / 5
- Polubienia
- 58
- Pobrania
- 400
- Wydruki
- 16
- Wyświetlenia
- 1376
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Little Jeep Car for Print in Place !!!
It have a 0.5mm clearance for work with almost every 3d printer!
It is Scalable!
If you want to scale down, watch for your own 3d printer clearance (mine is 0.3mm, so 40% down it would be able to spin freely)
If you want to scale up, the clearance will be higher too.
So if the original model the parts are getting glued together, scale a little up for it to work.
If you downloaded and enjoyed, leave a like!
Consider following us in YouTube!
https://www.youtube.com/channel/UCi9cvu7e2rjajhg9ldt6-tg