Little Jeep Car - PIP (Print In Place) without support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little Jeep Car for Print in Place !!! It have a 0.5mm clearance for work with almost every 3d printer!
- Rating
- 4.933 / 5
- Likes
- 58
- Downloads
- 400
- Makes
- 16
- Views
- 1,376
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Little Jeep Car for Print in Place !!!
It have a 0.5mm clearance for work with almost every 3d printer!
It is Scalable!
If you want to scale down, watch for your own 3d printer clearance (mine is 0.3mm, so 40% down it would be able to spin freely)
If you want to scale up, the clearance will be higher too.
So if the original model the parts are getting glued together, scale a little up for it to work.
If you downloaded and enjoyed, leave a like!
Consider following us in YouTube!
https://www.youtube.com/channel/UCi9cvu7e2rjajhg9ldt6-tg