Counting matching models…
Replacement stand for a Vision Engineering Mantis Microscope making use of a ¾" gas pipe and nipple mounted through the desk Additional hardware required: ¾" wood drill to go through desk ¾" Iron pipe DN20…
Крепление для монитора на трубу 25мм VESA 100X100
These are parts to make a ventilation system, you just need an 80mm pc fan (I use a phone charger to run it), 80mm diameter ventilation pipe and some hex-nuts and bolts for it. I use it for my elegoo saturn but also for my fdm printing…
Dying Light is one of my favorite games. I made this as an ode to it, as it's the first weapon you receive in the game. The STL is just the model, and it's not quite to scale, but the 3mf is ready to slice, and to scale. If importing the…
Small and strong pipe holder for 20mm pipes of all types. Profile feature 3 types of holder with 2 different depths, 1.5cm and 2.5 cm. 1 short, 1 medium and 1 enclosed holder. The mounting holes are 4.5mm. Please print it facing down due…
Thank you to ReProps for sharing the original files so I could make a remix that I could wear! Everything is fully printed. Install the hinge pin in the hinge before gluing into the pip-boy halves. I didn't come up with any clever way to…
One of the cheapest options for dust collection in home woodworking shops is to use readily available and cheap PVC drain pipe. The problem is that most dust collection fittings are not made for these pipes (though that seems to be…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This is a remix to create a 30mm-spaced-hole hinge. The goal was to replicate the dimensions of these hinges that I could not find in the US: https://www.amazon.de/gp/product/B0B5ZMNNGN These hinges were used in @Surfalex2000's Prusa XL…
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
It's a backscratcher with two settings - one side for gentle scratching, and one side for manly men who want to remove some skin. Comes in 3 different lengths for any size printer, but feel free to use the STEP to make your own. Can be…
Very useful when you want to attach a Coroplast prop to a PVC pipe to hold it straight. I use this on tombstones and other standing Coroplast models for LED pixels (WS2811) Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports…
You can use this at the base of your Coroplast model to hold a PVC pipe that will keep your model straight. Works very well with my other model https://www.printables.com/model/1084357-pvc-pipe-holder-for-coroplast-props Printing:…
Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…
As @Balesz_1733004 recommended I added V2 model file pipe_thread_measere_tool_v2.stl with wider pipe shoe and round edge.
This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I…
Idea I always disliked the looks of the two semi fitting pipe collars around the pipes of my radiators. During my last home improvement project, I decided to make the covers more attractive. They consist of three parts: The frontplate,…
A tool for inserting standard thickness (9mm) insulation (lagging) in common sizes (pipe sizes of 35mm, 28mm, 22mm, 15mm) into and then cutting. Designed for cutting insulation for straight lengths, 45° (135°) and 90° corners, as well as…
In my WC there is a 110mm water pipe running through the room (top-down). As a simple optical upgrade, I want to decorate the ends of the water pipe with a deco-pipe-sleeve that can be assembled without changing the water pipe. This is my…
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
During the kitchen restoration I have been worried I would make a simple mistake and mix up hot and cold water pipes. This small set of clips helped me to make sure I don't du such a silly mistake. Further more I wanted to maintain…
06 aipril 2026: Re-uploaded the model - errors corrected (I was young, green, and foolish)
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
UPDATE: 02.02.2022 added Dia Label on Backside added 30mm and 60mm Version DE: Rohrbeschriftung für 30, 40, 50 oder 60mm Durchmesser mit einschiebbaren Label. Befestigung mit zwei Kabelbindern. Größe der Labels: 54x104mm EN: Pipe labeling…
Made to mount my watering shower heads instead of leaving them lying around. I printed 4 in ESUN Grey PETG with 100% infill and no supports. will see how the prints hold up over time the mounting hole is a 4.4mm hole with a 1.8mm…
A great Wall Art of a piper. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Introducing the FDM (Fixum Dude Motors) print in place FedEx package delivery truck. Find the other companies' delivery trucks and the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints…
Pipe flushing nozzle for 1/2” garden hose If necessary, secure the nozzle with a cable tie to prevent it from coming loose. I printed mine from TPU, as this has very good layer adhesion and practically cannot break off.
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
created a top hat grommet for a 16mm pipe / hose to be inserted to make various things and appartises printed in tpu 100%infill outter diameter 19mm inner diameter 16mm flat top disc 26.5mm
Wall Split Flange Round Escutcheon Plate Cover for Various Pipes / Pipe Collar / Copritubo per idraulica Pipe Ø: Ø 20.7mm/ 0.81 inch Ø 25.8mm/ 1.1/2" Ø 29.9mm/ 3/4" inch Ø 33.7mm/ 1" inch Resize to adjust dimension If you download/enjoyed…
Tight wall-mount for various 75mm piping, for example: - plastic drain piping - heat recovery ventilation flexible piping First insert the M3 nuts into the base (use a pliers to snap in), and attach the base to the wall with two wall…
As i wanted to connect my tumble dryer directly to the drain, I bought a kit with a pipe that has to be fixed on the back of the tumbler. There is a screw on the left back of the tumbler which can be unscrewed to attach a part from the…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
Let me know if you have questions. print is straightforward: no brim, no supports, .02mm layers, PLA/PETG/TPU (high durometer only) should all be OK. If your building a desk with these plans and want to fit my rolling conduit filament…
End cap to fit over a 43mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
End cap to fit over a 25mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
HT-50 suction-slide-suction-pipe Slider ca.: 71x133x14 TPU 0.4mm Nozzle ca 1h ca.: 10m Filament no Supports 25% Infill Pipe ca.: 75x75x59 PETG 0.4mm Nozzle ca 3h ca.: 20m Filament Supports 90% Infill
Washing machine drain hose adapter to DIN 32, DIN 40, DIN 50, DIN 75 or DIN 110 standard sewage pipe. This rigid adapter allows you to connect a standard washing machine drain hose to a DIN32/40/50/75/110-compliant drain pipe, which are…
A replacement radiator pipe cover. The Holes are 17mm in diameter so that a 16mm pipe can easily fit, because the distance of the pipe on the ground can vary, there are differerent sizes. This is a larger Version of another Model I have…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black, Bronze and White.
1" DN25 cross connection for pipes with BSP thread. Fits great with my other pipemodels!
The base model is made for a 25mm pipe, I've made 2 variations, one for 21mm and one for 33mm pipe.
This is a 3D printable clip-on straight cut guide for pipes ranging from 20 mm to 200 mm in diameter (common standards for PVC, PE, and other plastic piping). Unlike many other designs that require you to insert the pipe into the tool,…
A simple end cap with a threaded male end to go with another female open connector to attach and close a 4in (can easily be scaled up or down) PVC pipe. edit: Have added the stl file as well per request.
This is a compact 3D-printed tube filter with a honeycomb mesh design. The cylindrical shape and open-grid hexagonal structure make it ideal for preventing debris or insects from entering small ventilation or drainage tubes, while still…
3/7/2026 NEW IMPROVED version features a slanted tapered dovetail connection that requires no supports! This is a split ring beauty cover for water pipes like are found behind toilets or under sink cabinets. It features super easy to snap…
Lesson Plan and Activity As the final project for Introduction to Engineering Design, I was given the choice of what I wanted to do. I really enjoyed making print-in-place telescoping fidgets earlier in the year, so I wanted to revisit…
This is a rotating pipette holder/stand with (or without) surrounding DNA helix and with (or without) your own logo. It has many customizable parameters and can be adapted for various pipette types. Materials (BOM) 1 x deep groove ball…
A simple way to re-route rain water into a bucket or other container. Printed in PETG and needs support. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
This 3 Way Internal PVC Pipe Connector has been designed to be used with 20mm PVC pipe to make some FPV gates (in particular tiny whoop gates but I'm sure you could make full sized gates just by leaving the PVC pipe longer) This model has…
Since I keep my hardware in an IKEA Kallax shelf behind a door it get's quite warm in summer. To not damage the hardware I designed a heat tunnel / heat pipe for any 80mm fan that can be just glued into the top right corner. The fan will…
This is a 3D printable pipe connector designed for pipes with an inner diameter of 150mm. The model is ideal for joining two pipes securely in various applications, such as ventilation systems, ducting, or custom piping projects. The…
Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
This fusion file is a bit of a mess, i will clean it up and re-upload when i get time. I just wanted to get this work out there for anyone else that felt like tinkering in the mean time. There's several revisions inside, the 2 most recent…
(NOTE: PLEASE REFER TO LAST PICTURE FOR CORRECT SIZING SETTINGS BEFORE PRINTING) make your own sheetmetal half round gutter downspout starter pipes with this jig. this jig is designed for you to stuff a piece of 11.7" paper or pipe…
A bracket for mounting 3in PVC pipe. The bracket is designed to work with 1/4in bolts and nuts and 1/4in Tapcon screws (for mounting to the wall). There is also space for 1/4in washers under the bolts and screws. It should work with…
A large half pipe for fingerboards. A large half pipe for fingerboards.
Summary This is a storage box used to store all the extra parts your Kotobukiya Rockman Zero kit comes with. It doubles as a life bar effects piece that can be displayed along side your model. Options The box is a fully upgraded “32 pip”…
Middle Pipe for Custom Ninebot G30 Front Suspension This part is currently in production. All CNC files are available for use. Required components: 1x DIN912 M4 6mm Compatible bolt sets are available on our Printables.
Removable pipe clip to secure a tarp, fabric, plastic sheet, etc. It's customizable so you can set the inner diameter and the length of the clip to whatever you need. In my case, I needed to secure clear plastic sheeting to steel…
This is a customized adaptor to attach the EufyCam S3 Pro to an 80mm rainwater pipe. I used an adhesive 12x3mm PU foam tape to fix it properly and have it protected against wind etc. You will also need M4 screws and nuts to attach it, the…
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
Double Routing Pipe Clamps - Fissatubo doppio For quick installation of: RNC conduits Flexible & rigid tubing Available for the following diameters: Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 40mm Features: Designed for faster printing Minimal…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Three Way Pipe-to-Pipe Clamp - Pipe Clip - Fissatubo triplo Ø20/25mm - Fissatubo triplo Ø20/25mm For quick installation of: RNC conduits Flexible & rigid tubing Corrugated pipe Designed for faster printing Minimal material usage Strong…
I was looking for this adapter everywhere, but all the options were either non-existent or too expensive where i live. Disclaimer: this is not a permanent fix, it should be only quick and short-term solution. This doesn't apply if you're…
A functional and aesthetic hook designed for hanging towels, bathrobes, or clothes on a bathroom radiator . It features a fun accent inspired by LEGO bricks. • Compatibility: The hook is designed for mounting on radiator pipes with a…
My pipe got broken and dyson didn't have stock for replacement, so i made mine. i printed with MK3S, PLA, 100% infill, 0.1mm, organic support
Roborock 37mm pipe edition filter deep clean adaptor/रोबोरॉक 37 मिमी पाइप संस्करण फिल्टर डीप क्लीन एडॉप्टर /Roborock 37mm 管道版過濾器深度清潔適配器 Robotics For my Roborock S5+ (and other types) I always clean the filter after vacuuming, so I decided…
Hangar 9 20cc Bronco Turbine Exhaust models! there is a left and right the left is marked
This is a print-in-place holyday ornament with a thousand sunny inside it. It does not neet any support. do to the small details a low laver hight and a maximul of 0,4mm nozzle is recomendet.
I needed a smoking pipe holder that would fit "all" pipes. Both short, long, bent and wide. So I came up with this modular design, where wooden barbecue skewers are used to adjust the length and height of the holder. I am new to CAD…
Ein schöner mehrteiliger Spinner für die 3DLabPrint Piper J-3 Cub. Da es noch keinen passenden Spinner gibt, habe ich diese speziell auf die Piper von 3DLabPrint entworfen und an die Oeffnung vorne angepasst. Die Schürze sollte mit den…
Watertrap cylinder with 18,5mm diameter that is connected with a 10,0mm (inside diameter) hose to the blowpipe.
Milchschlauchhalter für die Jura Giga 5 + 6, passt auf die LED der Tassenbeleuchtung.
SOAC all sizes pipette rack: A pipette rack designed for SOAC labs at SUNY Oswego, made to fit all available pipettes including multiheaded pipettes. Print Settings: I recommend printing with an interior brim for bed adhesion, minimum 2…
What was the trigger... Utricularia jamesoniana ( more info ) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud…
Please, make requests for specific sizes. Related Boxes https://www.printables.com/@brass_ring/collections/3088349 Heavy Duty Features: thicker box walls larger latch larger hinge protective fence around latch Print counts: 1 X Bottom 1 X…
The file has two parts into which the lilygo T-SIM boards will fit. There are a variety of boards with different SIMCOM chips, but all the ones I have seem to fit ok. The parts then locates the board within a 40mm Floplast drainage pipe…
The Poopy Pipes for those of you who have more than one P1S and need to collect a lot of poop Hardware needed M3x8 to mount a plate on the backside of the P1S I have made the parts in 1.2mm and 1.6mm. The parts in the main picture is 90%…
