100mm vent pipe hood coupler
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.31 – €8.94 net (excluding VAT)
For file: CE3_v11_bath_out_vent_connector.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.13 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 9.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this to connect a new outdoor vent cover to the vent pipe for my cooker extractor fan.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This coupler connects the inner diameter of a 100mm vent pipe making a tight friction fit. The other side connects a vent cover from the outer wall. The outer part allows some flexibility of the commercial cover so it can be screwed into the wall. If it isn't screwed into the wall some gaps on the side of the vent might exist because walls might not always be perfectly flat or at a perfect 90 degree angle to the pipe. So flexibility is needed. This is the outdoor vent cover I used: https://amzn.eu/d/j8Uz3ua. The project I used this in can be found here: https://jamesdaniel.github.io/bathroom_vent_project.html. I printed this model using PLA filament on my Creality Ender 3 printer.