Counting matching models…
Do you need a way to easily get perfume out of its original bottle? Than this simple print is for you. It's a simple adaptor for a perfume bottle that uses the vacuum created by a syringe to extract perfume. I have a nice travel bottle…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I had to extract bearing from my pool motor pump and there were not enough space to use my bearing extractor. The were just 7mm between the bearing and the rotor. Not enough I discover by chance the model…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
I had a fan from a failed project and decided to use it for something practical. The fan grills are made from infill. I drilled the connector hole, but you can use negative volumes to create holes in slicer.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
When I bought my first car, it didn't come with a fuse extractor, so I modeled this one from a standard Skoda fuse extractor. Printed with 0.3mm nozzle and 0.15mm layer height, but you can go even lower if you wish. The print may not be…
Original description 2025-03-07 Mainly, see lewosh's description . Changes: The charger board is replaced with this one . Note that it only balances two of the three batteries, so you might want to get a secondary 2S BMS . Also, note that…
A fume extractor is a necessary piece safety equipment while working with electronics. Soldering releases toxic fume from the rosin flux that evaporates. This fume extractor is a simple and most of the parts are likely already available…
Remix, to have the hose attach horizontally
I had a need to keep solder flux fumes out of my face whilst doing soldering on my electronics projects. There are plenty of solutions that are available for purchase. For me this is a simple mechanical project with some incorporated…
Another Remix of the legendary kirby fume extractor. You can use it as a cooler or fume extractor. You only have to add an activated carbon filter sponge and reconnect the motor inverted. So kirby will help you in every living situation…
I needed some way of extracting the smelly ASA fumes out of my garage. This channels the air from the AUX fan to the outside. There are no additional extraction fans. UPDATE: I added A Y joint to attach another extractor pipe. This one…
My default knobs broke after couple of years of use, plus they were smooth and hard to grab and rotate. New ones are much easier to grab and rotate and look good. Based on your printer settings – you might need to adjust hole size. Before…
Fume extractor for soldering work made with the laser cutter from 3mm birch plywood. Note that many wood thicknesses are not exactly 3mm thick and the dimensions may need to be altered. These plans are for exactly 3mm thick plywood. The…
needed a reducer for a cooker hood duct v2 added better version Category: Kitchen & Dining
This a fume extractor constructed from a 12V PC fan (80mm x 25mm). I originally planned to use brass inserts in the Back housing, but ended up just threading the M4x20 screws into the PLA. There are still bores in the housing for inserts…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
Compact Solder Smoke Extractor – Simple, Efficient, and Practical 🔥💨 Soldering can be a rewarding task, but dealing with smoke is never fun. That's where this Compact Solder Smoke Extractor comes in! Designed with simplicity and…
Here is a simple fumes extractor for soldering. It uses a 120mm 12v fan and 130x130x10 carbon filters that are easy to find online. It has an M6 screw going out in the bottom. This makes it possible to mount it in some soldering their…
Make your own smoke extractor, very useful for the electronician ! Last version : https://github.com/hugokernel/OpenSCAD\_Things/tree/master/ActiveCarbonExtractor Article en français sur mon blog :…
BOM: 1x fan 120mm 12v high pressure fan https://www.amazon.com/Noctua-NF-F12-iPPC-3000-PWM/dp/B00KFCRATC/ref=sr_1_2 1x 12v fan power brick https://www.amazon.com/Coolerguys-Power-Supply-Length-Multi-Functional/dp/B084JG4619/ref=sr_1_8 4x…
This is my interpretation from a soldering fume extractor / absorber. Codename ZAL ( Zinn-Dampfabzug Lötstation). On my Blog you can found a detailed buildlog with BOM and everything else.
As I didn't find a DIY solder fume extractor that I liked and trusted to work, I build myself one. For details see the video I made about it:
Do you struggle to extract the battery from your Ring camera or doorbell? Use this to help pull out the battery.d Use a M3 countersunk bolt through the central hole to complete this model. Then screw a few turns into the battery you wish…
I used tpu so it will fit snugly around a c19 led bulb but not the standard c19 bulb. I used a round head bolt as it is easier to use with the revolve function over a hex bolt. I have the standard c19 bulb using a hex bolt but did it…
This model is based on the description and drawing found in Zhang et al., Separation and Tracing of Anthropogenic Magnetite Nanoparticles in the Urban Atmosphere, Environ. Sci. Technol., 2020, 54, 9274-9284 I changed their design so the…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
First iteration of dust extractor cover for Tercoo Double disc. Single variant should also fit, triple variant might also fit. Next iteration needs a bit more stiffness. https://www.tercoo.com/ Two halves joined with 4 pcs m3x40 bolts and…
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents…
A small tool to remove the AAAA-Battery of a Surface pen. If the pen has any dents or the battery inflated a bit this might help. Compatible pens It fits surface V4 pens which are the standard pen for: Surface Pro 3 to 7+ Surface Book 1…
Quick and simple sandwich construction for fume extractor using 140mm fan. Needed something to suck fumes away from my face while soldering and didn't like other over engineered designs that uses a lot of plastic and unnecessary…
K-cup extractor with built in mason jar wide mouth lid. Prints without supports.
Extractor for a PF41 BB when you want to carefully remove the cup. Does need a cup larger than the bearing itself to pull the bearing into and a long screw. ( I used a Park Tool Crown Race Setting adapter but you just need a big enough…
Googly eyes not included. This is a redesign of my previous fume extractor, made to be a bit sleeker on the outside and to have the exhaust come out of the side instead of the front for easier use. I also added a foot for stability, and…
this uses a 40x40 fan and a 60x40 perf board when making the circuit you'll want to put the "power input" on the top right of the board. this system also works with a 3 pin dupoint connection this should be placed at the top left of the…
The buttons of our Novy extractor hood got stuck and were unusable. The intermediate plastic part linking the button to the actual PCB button broke / wore down. This piece replaces the intermediate part. Print 1 for each button.
It's an adjustable soldering fume extractor. It incorporates a tray for using a carbon filter to filter the fumes before extracting them. It should work with any 120 x 120mm fan, and it has been modeled to use: this switch:…
used 120 mm pc fan(s), an old power supply, and a toggle switch to go with frame. Power supply definitely overkill, but I had it laying around and it was easy to plug everything into it. The only thing I purchased were the filters. These…
Keep smoke and odors moving out the window so your lenses stay cleaner and your engraves stay crisp. This compact, high-flow extractor is designed for flat or low-profile projects and mounts to most standard laser beds. What you get 3MF…
Uses a Noctua fan and carbon filter to remove solder fumes and vapors.
This is a small fume extractor for my bench. Mostly used to remove fumes while soldering electronics. It uses an easily available 1/4" carbon foam filter cut to size. The fan is a 40mm x 40mm x 28mm 12v computer fan. I used a USB-C…
This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable) Directions Slot the TubeLock onto the hose (with the thicker grip facing away from the…
This is a extractor setup for a 120mm fan, I use a 3000rpm Noctua, and 120mm Zortrax HEPA + Activated Carbon filters. It is made up off three parts, the filter housing, a funnel piece and a fan housing. It is designed to fit an Ikea…
Idea The Extractor - a special tool for the removal of small objects from pipes, slits or else. Specially made to easily extract and remove broken nocks from arrows. Just put in some screw (wood screws might work best) that fits your…
For 120 mm fan and 10 mm active coal filter. The filter provides the pressure to keep the two parts together. Printed in PETG Carbon.
Your all-in-one holder for organisation and quick access to replacement nocks including helpful tools. Everything you need together in one system. Easy accessible - everytime. This companion is perfect for: Easy storage Quick access…
I printed this nice fume extractor but wanted my fan to be more solidly held in place than by the two side clips. This is a trivial internal plate that sits inside an existing rim in @dr.dentz' model and allows a 120 mm fan to be screwed…
My Lincoln Electric Miniflex Fume extractor didn't come with a nozzle for it and it's stupid expensive. Rather than fork over the cash, I decided to model this thing up. It works well but definitely print it out of something FR (flame…
using a standard 4-inch vent hose, keeping your shop air clean and your laser optics clearer during engraving and marking jobs. Optimized for engravers using standard fiber laser beds, this low-profile extractor is ideal for coin…
My default knobs broke after couple of years of use, plus they were smooth and hard to grab and rotate. New ones are much easier to grab and rotate and look good. Based on your printer settings – you might need to adjust hole size. Before…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
On AliExpress, I found these useful tools designed to extract motor gears from RC models and power tools. However, I didn’t like that they were delivered loose in a plastic bag, so I designed a proper storage solution based on the rugged…
Connect the Dewalt DWE 74xx series table saw dust outlet to standard 32mm ID hose, readily available to buy online. The Dewalt saw comes with an adapter which connects to a much larger hose, this is fine if you buy into the Dewalt…
Here are three remixed parts for the famous heavy duty solder fume extractor
This is a mod for the KOTTO fume extractor. Required parts: KOTTO Fume extractor 120mm X 120mm X 38mm, DC fan. I used the SUNON MEC0381V1-000U-A99, which is a high speed 12VDC affordable fan (6.70 CHF or ~7EUR on conrad.ch ) USB-C Trigger…
A more space-efficient twin-hose Y adapter for Festool dust extractors with hoses facing to the front. Can take the Festool slide blast gates and after-market 2.25" / 63 mm options as well. Print with the twin hoses down on the print bed,…
I use an inline duct fan to vent the fumes out the window in my basement. The boom arm allows me to position the extractor very precisely. Mic Stand Inline Duct Fan Vent Hose
Tool for installing and removing BNC cables on high density panels. Changes from original: Reduced length from 130mm to 80mm Adjusted profile to fit around right-angled BNC plugs Print in PLA or PETG. Use a generous brim. Supports…
This hybrid upgrade for the Anycubic Kobra S1 Combo is a must-have for printing technical filaments like ABS or ASA. It extracts toxic fumes (VOCs) directly at the source while keeping the printer's purge functionality fully operational.…
Simple fume extractor with 12v 4020 fan. Hardware: - Boost DC-DC 3,7V - 12V module - Usb-C connector - 4020 12v Fan - Switch button
Turn an old PC fan into an solder fume extractor with these 3D printed parts. They screw directly onto the fan, creating a compact and effective solution for removing solder smoke. Easy to assemble and ideal for hobby electronics and…
As I didn't find a DIY solder fume extractor that I liked and trusted to work, I build myself one. For details see the video I made about it:
First iteration of dust extractor cover for Tercoo Double disc. Single variant should also fit, triple variant might also fit. Next iteration needs a bit more stiffness. https://www.tercoo.com/ Two halves joined with 4 pcs m3x40 bolts and…
Adjusted original model to use Adafruit's HUSB238 USB-PD and a different filter type. Removed switch...makes in more minimalist 🙂 The fan guard is a PrusaSlicer merging of the original model's fan plate and Noctua's fan grill. Printed in…
A compact, portable fume extractor in a 1x1x6 Gridfinity form factor. Ideal for storing in Gridfinity tool boxes. Components Filter (e.g. Hakko A1001 - cut to size) 4010 fan (e.g. Sunon EE40101S1-1000U-999) USB PD module (e.g. AITRIP…
Made to fit the Rutlands Router Table dust port, down to 36.5mm outer diameter of the small end to fit my standard dust extractor hose
Extoil hasn't had ("sold out") caps available for their oil extractors due to “unexpected demand” and doesn't seem to be getting anymore in. I designed a rudimentary plug to fill the top opening on their oil extractor to meet my needs.…
Build the ultimate DIY soldering fume extractor from an old 120mm PC fan. This all-in-one design included a DC power forwarding hub, detachable magnetic hood, voltage display and easy access carbon filter bay. The fume extractor includes…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
I was getting tired of my old router spraying all the dust in my workshop, that's why i designed this dust extractor. It's directly bolted to the baseplate of the router. The OD of the hose connection is 35 mm and fits my rubber adapter…
Make your already-XLent EnXLosure for your Prusa XL even more XLent! Add fume extraction and ventilation with this remixed Back Top Panel by moi, Upton O'Goode, featuring a port that fits standard 4 inch flexible “dryer” duct. Some…
Make your own smoke extractor, very useful for the electronician ! Last version : https://github.com/hugokernel/OpenSCAD\_Things/tree/master/ActiveCarbonExtractor Article en français sur mon blog :…
I decided to combine a solder fume extractor with attachable helping hands. I have two slots for mini rocker switches since I also included a custom LED light. I am powering this with a 12v 5amp DC power supply. Designed this around a…
You are doing me a big favor by clicking the Like button :-) I use a silent two speed fan Print without support Shopping list: 1 x 3 mm red led + resistor 5.6k of stepdown converter 12 to 2 volt 1 x Microswitch 15 x 10 mm 1 x switch 8 mm…
In my model I used an old 9 volt motor of 26 mm diameter but feel free to change the diameter of the motor mount hole via the fusion 360 file to adapt this model to your needs. Additionally, 3 M3x35 mm screws and 3 M3 screw thread inserts…
Fan used in this project is NF-A6x25 PWM Fan is mounted using self taping screws from the Noctua package And you would need 8 or 10 (if with clip) M3 screws to screw the whole box :)
A simple model for assembling an activated carbon filter to an 80 mm fan to filter out soldering fumes.
I was not able to print the fume extractor adapter I designed on my 220x220 printer so split into 3 parts. Juuuuust fits on build plate. Doesn't need glue, but it couldn't hurt either. For 4" vent hose. Printed in PETG 15% gyroid infill 3…
Lötabsaugung US38 Deine perfekte Lösung für eine selbstgedruckte Lötabsaugung! Nachdem ich mit den bestehenden Designs für selbstgedruckte Lötabsaugungen nicht zufrieden war, habe ich meine eigene Lösung entwickelt – speziell auf die…
You need to squeeze 250mm x ~62mm x 10m of activated carbon foam in the round area. And ~65mm diameter and 10mm thick circle for end of the filter part
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents…
tool per la facile rimozione del tubo ptfe dell'AMS delle stampanti Bambulab
In case you need to remove/extract a M8 nut or screw without damaging the part, you need leverage. This part does precisesly this. I used a large washer on top of the 3d printed part in order to better distribute the pressure.
Solder fume extractor with active carbon pads, found on Amazon: https://www.amazon.nl/dp/B07WJ1Y1CH?ref=ppx_yo2ov_dt_b_fed_asin_title (it is sold to use in litter box, but it has active carbon in it so fine by me!). The fan is a 120*120mm…
It makes it easier to remove the battery. Especially helpful if you're using gloves or after flying you don't have much feeling in your fingertips :-) Added version with a pocket clip. Makes it easily accessible and easier to organise in…
I built this model with inventor to reuse my old pc fan (wich had 20 years). The electronic circuit is pretty simple : 12V input, switch, res, led and 12V fan.
Apart from an appropriate 120mm fan you will need the following Parts: PWM controller Boost converter (to go from 5V to 12V) 1 or 2 18650 cells with a batteryholder or solder tabs A lithium charge module preforbly with a usbc port 120x5…
In order to assemble the device you will need: printable parts made of ABS > PETG > PLA and (optional) feet made of flex (TPU); There are three different caps design. Choose yours! 12V 120 mm PC fan; 120 mm fan grill ; M3x6mm screws…
Shop vac attachment point for all the common chinese drillbit grinder clones. Designed to fit a Vevor MR-13, but the rear cover is shared by all manufacturers of that particular style drill sharpener. The intended way to attach a dust…
Steam Extractor Clamp for pipeline Bora 150mm. Recommended to set 0.2mm layer height, 5 perimeters for strong print.
Modelo de un extractor de teclas de un teclado mecánico de modelo sencillo y sin soportes además de un tamaño ideal.
Main Features: Suction of harmful solder fumes away from person; Easily replaceable charcoal activated filter; Option to vent to the outside with back hose attachment; Fan speed control can be added externally; Assembled Dimensions…
My 4" / 110mm bathroom extractor fan needed maintenance, but the external grille fell apart due to UV damage over some years. The external fitting is sealed into render, and several floors up, so rather than climb up and have to reseal…
I made an adaptor from my Makita 18v to my Bosch Dust Extractor. I made it in PETG with 20% infill and it has worked great.
Made this adapter for my Scheppach DC100 dust collector to connect shop vac hose. Fits standard shop vac hose. Printed in PETG with standard settings. 0.2mm layer height.
This gives a better grip and saves your fingertips when recovering M3 and M5 heat inserts. Scale in slicer for other sizes needed. Leave the body whole and use a brim or split the body to parts and use filament lengths and super glue…
Tired of trying to shake that pencil sharpener to get that broken graphite lead out? This little tool is designed to help take out that little piece of lead. Print at 0.08 or 0.12mm layer height, and orient it so that the flat edge is on…
![Bearing Puller / Extractor [REMIX]](https://media.printables.com/media/prints/a756e4d6-2351-4f16-8e97-809b6093deec/images/9509262_1a8f5d91-4b68-4c14-8bff-9267ab2b730a_1db29f2c-1f53-4e05-9938-77caf277135a/extracteur-roulement-surpresseur-v1-2-800x600.jpg)
