Arrma 4s Kraton/Mojave/Outcast Shock Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a longer shock spacer for my Mojave 4s and so I made some in Tinkercad and made a bunch of different sizes.…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a longer shock spacer for my Mojave 4s and so I made some in Tinkercad and made a bunch of different sizes. Spacers have the exact same width and inner diameter as stock, but with assorted heights to tune your suspension.
There is also a customizable version that is 100mm tall. This means that you can use the scaling tool in your slicer to get the exact height you want (for example,Z = 11% would give you a spacer 11mm tall.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
No
Supports:
No
0.2
Infill:
100
To install, first remove the stock spacers from your shocks. Next, snap the new one in place between the two non-removable spacers already on the shocks.
Category: R/C Vehicles