P
PrintablesNorman Barksby
Arrma Mojave Grom 30 mm Fan mount
I wanted to mount and not just double sided tape a 30 mm fan in my Mojave Grom since they are know to overheat.
- Pobrania
- 294
- Polubienia
- 24
- Ocena
- 5
Wyniki wyszukiwania: mojave
Liczymy pasujące modele…
P
PrintablesCranklotus
RC4wd 2 door Mojave Hilux mount for Vanquish VRD
All 3d files should be free. Enjoy this 2 door mount for the Mojave onto a VRD. Print with alot of walls for strength if needed.
- Pobrania
- 242
- Polubienia
- 20
- Ocena
- 0
P
PrintablesGonzoStrange
The Last Arrma Mojave bumper mount
Front and rear bumper mounts for the Arrma Mojave. These should only be printed in a flexible material like TPU.
- Pobrania
- 151
- Polubienia
- 25
- Ocena
- 0
P
PrintablesSpongeinside
Car stand for Arrma Grom Mojave
I've made this small car stand for my 1/18th scale Arrma Mojave Gromblx, to keep the wheels off of the ground (to prevent flat spots while the vehicle is stored away and as a display and work stand. Other Arrma vehicles on the same…
- Pobrania
- 140
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAndoo
RC4WD Mojave Custom Grill
This is a one-piece print that will screw on directly to a RC4WD Mojave body. I printed this standing up with tree supports.
- Pobrania
- 132
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGamer Unknown
ARRMA Mojave GROM Flag Mount
Hey guys, since the 4th of July is coming up, having little flags on RC cars seemed like a fun thing to do, so I created a mount for the ARRMA Mojave 4S. After recently getting the ARRMA Mojave GROM, I decided to make a flag mount that…
- Pobrania
- 115
- Polubienia
- 23
- Ocena
- 0
P
PrintablesPhaedrux
Mojave Vase
An elegantly shaped vase. Print Settings Notes: The shoulders of the vase are quite shallow and will require careful printing to succeed. I suggest a 0.15 layer height, and as wide of an extrusion width as you can manage. I use a 0.6…
- Pobrania
- 99
- Polubienia
- 25
- Ocena
- 0
P
PrintablesMike81622
RC Car Wall Mount 66 mm / 2.6 inch Tires (Arrma Mojave Grom, ...)
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 66 mm / 2.6 inches. I designed the bracket for the Arrma Mojave Grom. For mounting use 2x 4,5mm Spax screws…
- Pobrania
- 97
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDoubleC
Arrma Mojave 6s / EXB Mudguards
Mudguards for the Arrma Mojave 6S V2 / EXB. Two versions: One pair with "Mojave" print and some blank ones. Works with Scorched RC Fenders. Print in TPU, use M3x6 or M3x8 to attach them. Send it! Print Settings Printer Brand: Creality…
- Pobrania
- 92
- Polubienia
- 5
- Ocena
- 4
P
PrintablesAndoo
Mojave cab on SCX10 ii
This is a full back of cab for a RC4WD Mojave body and Skids that will work on an SCX10 ii or similar to mound the cab using screws there are optional brackets to mount the back using screws or you can just glue in place.
- Pobrania
- 91
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMike81622
Arrma Mojave Grom Mud Flaps
There are already some mud flaps for the Mojave Grom around on other platforms, but none of them really satisfied me, so here's my take on them, hope you like it :) Mud Flap Mount: Re-use the original screws, or replace them with 2x M3x16…
- Pobrania
- 88
- Polubienia
- 20
- Ocena
- 4,5
P
PrintablesOptikks
Arrma Mojave 4S Max8 Esc Holder
Für alle die eine Max8 in den Mojave 4s einbauen wollen. Wer den ESC kleben will nimmt nur die untere Platte, in Verbindung mit der oberen Platte lässt sich der ESC verschrauben. Könnte evtl auch für den Kraton 4S passen aber mangels…
- Pobrania
- 88
- Polubienia
- 7
- Ocena
- 0
P
Printablesltlowe
Arrma Mojave 4S Center Shaft Cover
A cover for the center shaft of a Arrma Mojave 4S XXLWB chassis. I made this because so I don't have to worry about battery wires or anything else getting caught in the shaft. In addition to covering the center shaft, it also slots over…
- Pobrania
- 86
- Polubienia
- 10
- Ocena
- 5
P
PrintablesRevellio
RC4WD Mojave II - Body Parts / Update 29.08.2026 - Shock-Tower Cover and Battery Box Combo
Hard Tailgate Logo I mounted the logo on two crawlers, variant 1 works better for me and looks cleaner. In variant 2, the glue dissolved the paint a bit (picture 1). Variant 1: Place the template on the tailgate and mark the letters.…
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 0
P
Printablesshoeys_for_newey
"Mojave Breeze" Chamber Heater for Sovol Zero (and others)
NOTICE: USE OF AN AUXILIARY CHAMBER HEATER POSES A RISK TO LIFE AND PROPERTY IF USED INCORRECTLY. BY DOWNLOADING THESE FILES YOU ACKNOWLEDGE THAT YOU ARE AWARE OF THESE RISKS AND AGREE THAT I AM IN NO WAY RESPONSIBLE FOR ANY DAMAGE YOU…
- Pobrania
- 74
- Polubienia
- 22
- Ocena
- 0
P
PrintablesAndrei Gakh
arrma mojave 4s ARA320740
Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.
- Pobrania
- 72
- Polubienia
- 13
- Ocena
- 0
P
PrintablesModernBirdFPV
Arrma Mojave Grom FPV mount
An FPV mount for the Arrma Mojave Grom that fits the generic AIO FOV cameras found on sites like Amazon, Banggood, and AliExpress.
- Pobrania
- 68
- Polubienia
- 15
- Ocena
- 0
P
PrintablesJonny B
ARRMA Mojave 6s Drift Sleeves
Drift wheels for the Arrma Mojave 6s. Printed in PETG but can be printed in PLA. Have not yet tested TPU, but so far, they work well. I would recommend printing in a dark color, because wheels in color will soon darken with road rash.…
- Pobrania
- 56
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGamer Unknown
ARRMA Mojave 4S Flag Mount
Hey there, since the 4th of July is coming up, I decided to make a mount for a couple flags that would be attached to the back of my ARRMA Mojave 4S. The mount is intended for 2 flags with a 5mm flag pole diameter. I printed this on my…
- Pobrania
- 54
- Polubienia
- 8
- Ocena
- 0
P
PrintablesdyeLucky
Hook Ledge for New Age Pet Mojave Reptile Terrarium (48in)
I have a 48in New Age Pet Mojave terrarium & needed something to help anchor a rope 'ladder' to the side of the terrarium, so I designed this ledge to fit into the slots on the side of the terrarium.
- Pobrania
- 52
- Polubienia
- 24
- Ocena
- 0
P
PrintablesTechMagic3D
Arrma 4s Kraton/Mojave/Outcast Shock Spacers
I needed a longer shock spacer for my Mojave 4s and so I made some in Tinkercad and made a bunch of different sizes. Spacers have the exact same width and inner diameter as stock, but with assorted heights to tune your suspension. There…
- Pobrania
- 52
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDustin Nesbit
Jeep Decal (Rubicon & Mojave Wheel Decal) Keychain
Jeep Decal (Rubicon & Mojave Wheel Decal) Keychain
- Pobrania
- 51
- Polubienia
- 8
- Ocena
- 5
P
PrintablesTechMagic3D
Arrma 6s Steering Stiffener Insert (Kraton / Mojave / Typhon / Fireteam )
I was a little unhappy at the somewhat sloppy servo saver on my Arrma Fireteam, and the design of the bellcrank prevents you from simply tightening it. Thus, I made these spacers which fit between the factory metal washers and drastically…
- Pobrania
- 48
- Polubienia
- 18
- Ocena
- 0
P
PrintablesTechMagic3D
Arrma 6s Hobbywing ESC Switch Mount ( Kraton / Mojave / Fireteam )
This holder allows for secure mounting of Hobbywing Max G2 series power switches in the same position as the stock Spektrum power switch. The switch is supposed to tightly pop into place but you could also use a dab of glue if it isn't…
- Pobrania
- 48
- Polubienia
- 7
- Ocena
- 0
P
Printablesmechanic72
Mojave 6S Skid Plate R
The roof's skidplate is from Rcmaniacs, shortened to fit into the recess. The right-hand skidplate is in the direction of travel, and I've tried to preserve its original shape as much as possible. link to the body…
- Pobrania
- 47
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGonzoStrange
Arrma Mojave reinforced rear skid plate mount ARA320546
Arrma Mojave reinforced rear skid plate mount ARA320546 The stock countersunk screws kept pulling through the oem part, so I made one that uses a cap head screw and washer. I printed this with Taulman 3D Glass Fiber Alloy Nylon and it…
- Pobrania
- 42
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPetr Rubeš
Arrma Mojave 4s replacement body pin saver / washer / pad / spacer/ clip
It features a 9mm hole and small slit at the bottom of the ring, so you can squeeze the rubber band through without having to remove it from the body.
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBunkerotter
Arrma Mojave Grom 223S BLX 30mm Fan mount
A 30mm fan mount, very similar to the one found on etsy, but they don't deliver to my country, so I made a clone. It should be functionally exactly the same. It was designed to use the original single screw mount and is a drop in…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTechMagic3D
Arrma Mojave 4s Max8 ESC and Switch Mount
This mount allows you to mount a Max8 ESC and its switch into a Mojave 4s (and possibly other Arrma 4s models too). It's nothing too fancy, but it does work well and mounts securely. Since the Max8 is wider than the mounting holes, the…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHowYou
Arrma Mojave GROM Brushless Spring Perch
replacement perch/ coil spring holder
- Pobrania
- 24
- Polubienia
- 0
- Ocena
- 0
P
PrintablesOverengineering
Shock absorber rod end for Arrma Mojave Grom ARA-1495 M2.5
I made a model for the rod end of the shock absorber, because the part was not available at the time. Its a quick fix, but obviously not as good as the real part. The real part can be found under the number ARA-1495
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTechMagic3D
Arrma 4s Kraton / Mojave / Outcast ESC Switch/Gyro Mount
This is a simple mount that attaches to the top of the Arrma 4s RX box. It holds a Hobbywing ESC power button and the AGFRC V3 aluminum gyro. There is also a version that just holds the Hobbywing button. Normally it's a press fit, but you…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesmechanic72
MAX6 G2 button mount for Mojave 6S
Mount for MAX6 G2 buttons for Mojave 6S in the standard location, optimized for printing without supports. After printing, remove the locations indicated by the arrows. Крепление кнопки для MAX6 G2 в штанное место для Mojave 6S. материал…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCookie Rc
Arrma Mojave Grom GoPro mount
This is a GoPro mount for the Arrma Mojave Grom that mounts onto the roof, comes in 3 parts 1 of which is 95a Tpu. The model was inspired by the Arrma Mojave Grom Roof Protector which is a great print if you just want the protection with…
- Pobrania
- 9
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBunkerotter
Arrma Mojave Grom Mud Flaps (angled)
It's just the mount for Mike81622's Mud Flaps, but angled backwards by 5°, I've included the fusion archive file, in there you'll find a parameter to change the angle. I've had a bit of an issue that the Mud Flaps were angled slightly…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printables
Mojave 4s
Hallo Zusammen, mein Mojave 4s war von Anfang an etwas zu weich. Daher habe ich 3 unterschiedliche Spacer in 5mm, 8mm und 12mm konstruiert um die Federvorspannung zu erhöhen. Dadurch kann man die unterschiedlichen Höhen miteinander…
P
Printables
Mojave 4s
Hallo Zusammen, mein Mojave 4s war von Anfang an etwas zu weich. Daher habe ich 3 unterschiedliche Spacer in 5mm, 8mm und 12mm konstruiert um die Federvorspannung zu erhöhen. Dadurch kann man die unterschiedlichen Höhen miteinander…
P
Printables
Mojave body mount reinforcements for new style mounts ARA320544
Reinforcements for the new style of Arrma Mojave body mounts #ARA320544 Should only print in a flexible material like TPU Need 8 zip ties. Four of them will need to be about 8 inches long.