Arrma Mojave Grom GoPro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a GoPro mount for the Arrma Mojave Grom that mounts onto the roof, comes in 3 parts 1 of which is 95a Tpu.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a GoPro mount for the Arrma Mojave Grom that mounts onto the roof, comes in 3 parts 1 of which is 95a Tpu. The model was inspired by the Arrma Mojave Grom Roof Protector which is a great print if you just want the protection with no GoPro mount. The GoPro mount is this model which is the best GoPro mount I've found so far. I will update the model if I find any week points. There may be a future version that is just a roof protector.
Materials that will work/ that you need:
Abs recommended
Asa recommended
Asa cf / Abs cf highly recommended
Tpu recommended
Petg will work
Pla not recommended
What you will need:
2 m3x10 for attaching the GoPro mount the the Tpu part
4 m3x12 for attaching the 2nd part
4 m2.5x12 though original ones that came on top of the car may work
6 m3 nuts
How to assemble:
The assembly is pretty easy as you simply just all of the nuts into there slots/ cut-outs then attach everything together. After that remove the 2 roof protectors from the top of the car then swap them out for the GoPro mount which attaches using the 4 m2.5x12 screws.